Table of Contents
Advertisement
Device Requirements: Audio-0002
2 S/PDIF-out header (1*4)
1 internal speaker header (2*4)
1 front panel audio header (2*5)
Add HD de-pop CKT (the attachment is the reference, please propose your
solution)
S/N ratio: 90 dB at rear output jack
LAN
Controller: Marvell 8071 Gigabit Ethernet controller
Port : 1 x RJ45 rear port for Gigabit Ethernet
Design Criteria:
Should be worked under 10/100/1000Mbs environment
Reserved disable function on both hardware & BIOS side. Default is enabled
Support DASH 1.0/1.1 feature
USB
Controller Type: SB710
Ports Quantity: 12
4 port for rear ports
On-board: 4 2*5 headers
Connector Pin: standard Intel FPIO pin definition
Data transfer rate support:
USB 2.0/1.1
1394
Controller: Jmicron JM831 1394a controller
Connector Quantity: 2
1 rear 6pin IEEE1394 port
( 6 ports)
4 ports for front daughter board
2 ports for internal card reader
3
Hide quick links:
Advertisement
Table of Contents
