Viewing Images - Sony Cyber-shot DSC-RX10 Help Manual

The image is blurred.
Activate the SteadyShot function by pressing the shutter button halfway

down and then shoot images.
The picture was taken in a dark location without the flash, resulting in

product-shake. The use of a tripod or the flash is recommended. [Hand-held
Twilight] and [Anti Motion Blur] in [Scene Selection] are also effective in
reducing blur.
The LCD screen darkens after a short period of time passed.
If you do not operate the product for a certain period of time, the product

switches to the power-save mode. The product exits power-save mode when
you perform operations such as pressing the shutter button halfway.
The flash takes too long to recharge.
The flash has been fired in succession in a short period. When the flash has

been fired in succession, the recharging process may take longer than usual
to avoid overheating of the camera.

Viewing images

Images cannot be played back.
Make sure that the memory card is fully inserted into the product.

The folder/file name has been changed on your computer.

When an image file has been processed by a computer or when the image file

was recorded using a model other than this product, playback on this product
is not guaranteed.
The product is in USB mode. Disconnecting the product from the computer.

Use "PlayMemories Home" to play back on this product images that are

stored on your computer.
The date and time are not displayed.
The screen display is set to display images only. Press DISP (Display Setting)

on the control wheel to display the information.
The image cannot be deleted.
Cancel the protection.

The image was deleted by mistake.
Once you have deleted an image, you cannot restore it. We recommend that

you protect images that you do not want to delete.
A DPOF mark cannot be put.
You cannot place DPOF marks on RAW images.

169