Tape Removal Method At No Power Supply; Disc Removal Method At No Power Supply - Toshiba SD-V280UA Service Manual

TAPE REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the Top Cabinet, Front Cabinet and DVD Block and the Fig. 1 below can be seen.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Remove one screw of the Loading Motor from the insert hole for screw driver and remove the Loading
Motor.
3. Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
4. Rotate the Clutch Ass'y either of the directions to wind the Video Tape in the Cassette Case.
5. Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
Insert hole for screw driver

DISC REMOVAL METHOD AT NO POWER SUPPLY

1. Remove the Top Cabinet and Front Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
2. Rotate the gear of Deck CD section in the direction of the arrow by hand, remove the disc from Deck
CD. (Refer to Fig. 3)
If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below.
1. Ensure the DVD Set is connected to the TV.
2. Turn Unit ON.
3. Confirm that no sisc on the disc tray.
4. Press and hold the '7' key on the remote control unit.
5. Simultaneously press and hold the 'STOP' key on the front panel.
6. Hold both keys for more than 3 seconds.
7. The On Screen Display message 'INITIALIZED' will appear.
8. The 4 digit password has now been cleared.
NB: The above procedure will reset ALL of the player's settings to the default factory state.
Fig. 1
Gear
Fig. 3
PARENTAL CONTROL - RATING LEVEL
4 DIGIT PASSWORD CANCELLATION
Loading Motor
Screw
Pinch Roller Cam
Main Cam
Main Chassis (Front Side)
A1-4
Capstan DD Unit
Clutch Ass'y
Fig. 2
Deck CD