Use only replacement parts recom- mended by the manufacturer. 3. Unless otherwise specified: a. Resistor values are in ohms. 6. Use McIntosh Remote Control Model HR056 with the b. Capacitor values are microfarads (uF). MCD201. c. Inductor values are in microhenries (uH).
PARTS LIST MAIN PCB 750293 Ref No. Description Part No. Ref No. Description Part No. CAP MONO 1000PF 50V 10% NPO 061344 CAP MONO 150PF 200V 5% 061349 CAP MONO 1000PF 50V 10% NPO 061344 CAP ELECT 47UF 35V 066446 CAP MONO 1000PF 50V 10% NPO 061344 CAP MONO .1UF 50V 20% Z5U...
Page 19
MCD201 PARTS LIST con’t MAIN PCB 750293 (cont’d) Ref No. Description Part No. Ref No. Description Part No. (F5) HOLDER FUSE 5X20MM PCB MOUNT 178159 C121 CAP ELECT 47UF 35V 066446 FILTER EMI 180057 C122 CAP ELECT 47UF 35V 066446...
Page 20
PARTS LIST con’t MAIN PCB 750293 (cont’d) Ref No. Description Part No. Ref No. Description Part No. CHOKE 18UH 5%-10% 122394 RES MF 2.21K 1% 1/4W 144584 CHOKE 18UH 5%-10% 122394 RES MF 47.5K 1% 1/4W 144526 CHOKE 18UH 5%-10% 122394 RES MF 475 OHM 1% 1/4W 144509...
Page 21
MCD201 PARTS LIST con’t MAIN PCB 750293 (cont’d) Ref No. Description Part No. Ref No. Description Part No. R114 RES MF 221 OHM 1% 1/4W 144559 QUAD 2 TO 1 LINE DATA SELECTOR 133476 R115 RES MF 221 OHM 1% 1/4W...
Page 22
PARTS LIST con’t DISPLAY PCB 750294 (cont’d) Ref No. Description Part No. Ref No. Description Part No. SWITCH TACT 150058 LED SQUARE RED 058109 LED GRN 5MM HI-INTENSITY 058165 SWITCH TACT 150058 DECIMAL TO BCD ENCODER 133454 LED GRN 5MM HI-INTENSITY 058165 DOT MATRIX VFD DRIVER 133642...
Page 28
SERIAL NO. XD1001 And Above The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated, who reserve the right to improve design without notice. Because of the constant upgrading of McIntosh products’ circuitry and components, the Company cannot insure, and does not warrant, the accuracy of the within schematic material, which is intended for information only.
Need help?
Do you have a question about the MCD201 and is the answer not in the manual?
Questions and answers