Subscribe to Our Youtube Channel
Related Manuals for McIntosh MCD12000
Summary of Contents for McIntosh MCD12000
- Page 1 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com MCD12000 SACD/CD Player Owner's Manual...
- Page 2 OPTICAL 1 OPTICAL 2 CLASS 3R Laser (IEC60825-1). MCD12000 DIGITAL SACD/CD PLAYER AUDIO OUTPUTS CLASS 1 McINTOSH LABORATORY, INC., LASER PRODUCT CAUTION BINGHAMTON, NY 120V 50 60Hz 50W RISK OF ELECTRIC SHOCK DO NOT OPEN HANDCRAFTED IN USA WITH US AND IMPORTED PARTS SERIAL Product complies with CRF Title 21, Ch.
-
Page 3: Table Of Contents
Thank you from all of us at McIntosh Table of Contents • Advanced Transport with precision-Diecast Aluminum Drawer With the MCD12000 SACD/CD Player, you have Introduction ............... 3 • R-Core Power Transformer and Multi- invested in a precision instrument that will provide Trademark and License Information ...... -
Page 4: Dimensions
Dimensions Where to Put It The MCD12000 can be placed upright on a table or Front View shelf, standing on its four feet. It also can be custom " -1/2 installed in a piece of furniture or cabinet. 44.5cm Always provide adequate ventilation for your MCD12000. -
Page 5: Navigating The Rear Panel
18. Main Power: Connect to a power outlet using 6. Coax Inputs: Connect coaxial cables for digital 12. Power Control In: Receives an On/Off signal the included power cable to supply power to the signals into these ports. from a connected McIntosh component via a 3.5mm MCD12000. cable. -
Page 6: Connection Diagram
OPTICAL 2 Connect to MCD12000 DIGITAL AUDIO OUTPUTS SACD/CD PLAYER AC Power CLASS 1 McINTOSH LABORATORY, INC., CAUTION LASER PRODUCT 120V 50 60Hz 50W BINGHAMTON, NY RISK OF ELECTRIC SHOCK DO NOT OPEN HANDCRAFTED IN USA WITH US AND IMPORTED PARTS Outlet Product complies with CRF Title 21, Ch. -
Page 7: Navigating The Front Panel
Meter and Tube lights (On/Off). It also allows you receives commands from your Remote Control. When the MCD12000 unit is in Standby (turned Off), to enter the Setup Menu by pushing it. Rotating the 7. Vacuum Fluorescent Display (VFD): Displays... -
Page 8: Navigating The Display
Navigating the Display Indicates the type Indicates the MultiChannnel Indicates the RANDom Indicates when the tracks on the of disc loaded, Layer of the SACD Disc is Play Mode is active disc are MP3 or WMA encoded. CD or SACD active. -
Page 9: Connector And Cable Information
Connector and Cable Information RS232 Port Connector Next, connect the Computer to the MCD12000 using a The RS232 Port uses a 3.5mm stereo mini phone plug USB 2.0 Cable Type A to Type B. XLR Connectors to connect to external third-party controllers. -
Page 10: Using The Setup Menu
Button. To power the MCD12000 off, do this again. control of the MCD12000. The default is to use the The version of the main firmware of the MCD12000 Normal control codes which will be perfectly fine for can be viewed by entering the Setup Menu. -
Page 11: Playing/Navigating A Disc
CD-ROM. The 5 button can be used previously removed input: to Enter the folder or Play the track shown on the To Factory reset the MCD12000, enter the Setup Display. For navigating data discs, please see Page 12. Menu. Rotate the Left Knob until “FACTORY •... -
Page 12: Using Remote For Mp3/Wav, Data Playback
When playing a Data CD Disc or Data DVD Disc, the Sub Folders, and Tracks. It also indicates the Album MCD12000 Front Panel Information Display will also Name, the Artist Name, the Track Name, and the indicate the following:... -
Page 13: Resetting The Microprocessor
NEXT button and STOP button 4. While the track just selected is playing back, the The MCD12000 should be reset in a few more Front Panel Display may also indicate the Track seconds. -
Page 14: Navigating The Remote Control
Select Disc, USB Mode or Coax/Optical Digital Inputs Press to FAST-REVERSE thru the current selection Press to toggle Meter or Tube Lights ON or OFF Press to STOP disc playback Note: The Remote Control Push-buttons not identified are for use with other McIntosh Products... -
Page 15: Changing Remote Control Batteries
Note: If at any time the Player seems unresponsive to the desired Remote Control Command, it may be necessary to select the color of the push-button nomenclature for the desired command. This is accomplished by first pressing the SHIFT Push-button to select gold, as indicated by the LED, and then within 3 seconds pressing (or in the case of some functions repeatedly pressing) the desired command push-button. -
Page 18: Audio Specifications
110dB (A-weighted) Standby: Less than 0.5 watt DXD: DXD352.8kHz, DXD384kHz Dynamic Range DSD: DSD64, DSD128, DSD256, DSD512 Note: Refer to the rear panel of the MCD12000 for the Better than 100dB correct voltage. Digital Audio Output Format Overall Dimensions Harmonic Distortion... -
Page 19: Packing The Mcd12000
Packing the MCD12000 Quantity Part Number Description When shipping the MCD12000, it is highly recom- 033888 Shipping Carton mended that the unit be packed as it was originally 034692 Pad Bottom shipped to avoid damage. Failure to properly pack 034691 Foam Top - Inner Carton the unit will likely result in damage. - Page 20 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 www.mcintoshlabs.com The continuous improvement of its products is the policy of McIntosh Laboratory Incorporated who reserve the right to improve design without notice. Printed in the U.S.A. McIntosh Part No. 24112701...
Need help?
Do you have a question about the MCD12000 and is the answer not in the manual?
Questions and answers
Can I play on my MCD12000 music files from flash memory or only from CD/DVD records?