Usage Instructions - White-Westinghouse WRT093DBHW Instruction Manual

Usage instructions

How to Turn on the Refrigerator
1. Clean the parts of the refrigerator with warm water containing a little neutral
detergent and with clear water, and wipe them dry.
2. Turn the thermostat knob to the "MAX" position, turn on electricity. The
compressor and the light inside the refrigerator begin to work.
3. Open the door 30 minutes later, if the temperature in the refrigerator
decreased obviously, it shows that the refrigerator system works well. When
the refrigerator operates for a period of time, the temperature controller will
automatically set the temperature within limits it opens.
Electric parts of the refrigerator can only be wiped by dry cloth.
Attention
After turning off your unit you need to wait at least 10 minutes to turn it on
again.
Filling the Refrigerator
Follow these instructions the first time you fill the refrigerator, or after you defrost
it.
1. Turn the refrigerator on and let it run for two hours prior to putting food inside.
2. If the food is fresh, put it in the refrigerator little by little, with one hour intervals.
3. Load first shelves and then start loading the door compartments.
4. For freezer food storages use one hour intervals between them.
5. After filling the refrigerator, adjust the thermostat to the appropriate position,
following the instructions under item "Temperature Adjustment".
Freezing capacity
The interior of the freezer compartment keeps foods at temperatures of -18 ° C.
Usage instructions
31
Temperature adjustment
1. TEMPERATURE CONTROL
The temperature is controlled automatically. The temperature control inside the
refrigerator and freezer compartments is responsible for the cooling grade of
each compartment.
Freezer temperature
Model
controller
WRT093DBHW
WRT093DBHS
WRT093DEHW
WRT093DEHS
WRT093DBHA
WRTW095DBJW
WRTW095DBJG
WRT113DBHW
WRT113DBHS
WRT113DEHW
WRT113DEHS
WRT113DBHA
WRTW115DBJW
WRTW115DBJG
2. HOW TO START
01. Put control in normal temperature.
02. Connect the power cord.
3. HOW SET THE TEMPERATURE
Many external factors can influence the internal temperature of the refrigerator
or the temperature of the freezer:
01. The temperature and humidity inside the house.
02. The frequency that the doors are opened the quantity of hot food is being
stored in the refrigerator.
Refrigerator temperature
controller
Usage instructions
32