TEST MODE
This set have the test mode function.
<Set the Test Mode>
1. Turn ON the regulated power supply. (The clock is displayed)
[OFF]
Note: Press the
button, if the clock is not displayed.
[4]
2. Push the preset
button.
[5]
3. Push the preset
button.
[1]
4. Press the preset
button for more than two seconds.
5. Then the display indicates all lights, the test mode is set.
<Release the Test mode>
[OFF]
1. Push the
button.
MD SECTION
MD section adjustments are done automatically in this set.
TUNER SECTION
Tuner section adjustments are done automatically in this set.
18
SECTION 4
ELECTRICAL ADJUSTMENTS