Location Of Controls; Setting The Clock - Sony MDX-C8500R Service Manual

Location of controls (MDX-C8500X)
Card remote commander RM-X91
OPEN/CLOSE
OFF
MENU DISC LIST
SEEK SEEK
SOURCE
SOUND DISC ENTER
DSPL MODE
ATT VOL
4
SECTION 2
GENERAL
The corresponding buttons of the card
remote commander control the same
functions as those on this unit.
1 OFF button
2 MENU button
3 SOURCE button
4 SEEK/AMS (cursor </,) buttons
5 SOUND button
6 DSPL button
7 ATT button
8 LIST button
9 DISC/PRST (cursor M/m) buttons
0 ENTER button
qa MODE button
qs VOL buttons
This section is extracted from
instruction manual.

Setting the clock

The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "Clock"
appears.
1 Press (ENTER).
The hour indication flashes.
2 Press either side of (DISC/PRST) to set
the hour.
3 Press (+) side of (SEEK/AMS).
The minute indication flashes.
4 Press either side of (DISC/PRST) to set
the minute.
2
Press (ENTER).
The clock starts.
After the clock setting is completed, the
display returns to normal playback mode.
Tip
You can set the clock automatically with the RDS
feature (see page 24). (MDX-C8500R)
Note
In the initial setting, the clock indication appears
while the unit is turned off.
When you select the "on" setting of the "D.Info"
item (page 29), you can see the clock indication in
the upper part of the display while you are
enjoying any source.