Op50 Usage On Table With Angle Adjustment Or On Wall - Karel OP50 Technical Reference And User's Manual

OP50 Technical Reference and User Guide

OP50 Usage On Table With Angle Adjustment Or On Wall

When used as a desktop phone, with the help of its adjustable stand, the angle between
the phone and table can vary between 20 and 60 degrees.
To adjust the angle the telephone must be moved up-down by pressing the point shown in
the figure below.
To hang the telephone on wall, two vertical holes (8 cm apart from each other) appropriate
for the anchor plug and screws must be placed on the vertical surface where the telephone
will be hung.
The anchor plugs must be placed in the holes and the screws must be placed in these
plugs such that their heads are 3 mm outside of the hanging surface.
Then the telephone's leg must be adjusted to its horizontal position and as shown in the
figure below, the stand must be fixed to the telephone mold with the help of screws. Then
the screw dents at the backside of the telephone can be hung to the screw heads on the
hanging surface.
15