nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
9.) Insert the SRT-6 between the Antenna Cover and
Chassis Assy. Additional force may be required while
opening the Antenna Cover clips.
11.) Protect the Camera Rear Bezel Assy with a
plastic film before turning the unit.
13.) Unlock and remove the VGA Camera with the SS-
51 camera removal tool. (N70 only)
15.) Unscrew the 6 Torx size 6 plus screws in the
shown order.
For Assembly use the reverse order
and the torque of 25 Ncm.
Service Manual N70 N72 Level 1&2
PAGE 10 (18)
COMPANY CONFIDENTIAL
10.) Remove the Power Button with tweezers.
12.) Remove the Camera gasket (N70 only).
14.) Mind the correct position when fitting the
Camera into its compartment. (N70 only)
16.) Lift the UI-frame Assy from Chassis Assy. Mind
the still connected flex foil of the LCD.
Copyright © 2005-2007 NOKIA Corporation. All rights reserved.
Approved 7.0
MGR
12.Sept.2007