Installing On Windows Vista Computers - Western Digital My Book User Manual

d. Click Next:
5. When the installation completes, click Finish:

Installing on Windows Vista Computers

After you physically connect the drive as shown in Figure 3 on page 5, the Found New
Hardware screen displays.
Note: If Autoplay is enabled, two additional screens might appear at the same
time as the Found New Hardware screen. If they appear, close them.
You can use the Found New Hardware screen to install the SES driver either:
• Automatically, if your computer is connected to the Internet
• Manually, whether your computer is connected to the Internet or not
MY BOOK
USER MANUAL
INSTALLING THE SES DRIVER – 74