Panasonic Lumix DMC-TZ37EC Service Manual page 54

10.3.2.1. How to adjustment the Touch Panel
<Preparation>
• Prepare two touch pens.
<Adjustment Procedure>
1. Start up the automatic adjustment mode and set the TPC flag to "O".
2. (+) appears in the upper right and bottom left (Fig.3.7).
Touch the two (+) marks once at the same time. (At this time, (+) mark indications do not change.)
3. After 1 second or more elapses, touch the two (+) marks once at the same time again in the same manner.
4. The (+) mark appears in the center (Fig.3-8). Then touch the (+) mark.
5. The (+) mark appears in the upper left (Fig.3-9). Then touch the (+) mark.
6. The (+) mark appears in the bottom left (Fig.3-10). Then touch the (+) mark.
7. The (+) mark appears in the bottom right (Fig.3-11). Then touch the (+) mark.
8. The (+) mark appears in the upper right (Fig.3-12). Then touch the (+) mark.
9. The (+) mark appears in the center (Fig.3-13). Then touch the (+) mark.
10. When "OK" is displayed (Fig.3-14), adjustment is complete.
* Touch at least 500 msec.
54