4. Turn the Both Side Cam Frame Unit to the end in the
arrow direction while holding the Outside Cam Frame
Unit. (About 118.5 degrees)
*Confirm that 1st Lens Frame Unit does not rotate when
the Both Side Cam Frame Unit rotates.
(It's the confirmation that previous insertion is done
normally.)
9.5.4.
Insert the Decorative Frame Unit
1. Hold the Straight Key (Both Side Cam Frame), turn it in
the arrow direction and align with the Straight Key
(Outside Cam Frame).
2. Insert 2 toothpicks (rotation stopper) in the position as
below.
44