Advertisement
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Important Safety Advice
WARNING – DO NOT USE UNTIL THE FEET ARE FITTED
CORRECTLY OR IT IS WALL MOUNTED USING THE
CORRECT WALL-MOUNTING KIT.
WARNING – THIS RADIATOR MUST ONLY BE USED IN
THE UPRIGHT POSITION.
WARNING – THIS RADIATOR MUST NOT BE LOCATED
IMMEDIATELY BELOW A FIXED SOCKET OUTLET.
WARNING – DO NOT USE THIS RADIATOR IN THE
IMMEDIATE SURROUNDINGS OF A BATH, A SHOWER
OR A SWIMMING POOL.
IMPORTANT – IF THE RADIATOR IS TO BE USED IN A
BATHROOM OR SIMILAR LOCATION, IT MUST BE WALL
MOUNTED SO THAT NO PART OF IT CAN BE TOUCHED
BY ANY PERSON USING A BATH OR SHOWER, AND
WIRED IN ACCORDANCE WITH I.E.E. REGULATIONS
BY A COMPETENT ELECTRICIAN.
WARNING – THIS RADIATOR CARRIES A WARNING 'DO
NOT COVER' TO ALERT THE USER TO THE RISK OF
FIRE THAT EXISTS IF THE RADIATOR IS ACCIDENTALLY
COVERED.
DO NOT COVER THE RADIATOR or place material or
garments on it, or obstruct the air circulation around the
radiator, for example with curtains or furniture, as this
could cause overheating and a fire risk.
The radiator complies with stringent safety standards
but to ensure efficient operation SURFACES OF THE
RADIATOR WILL BECOME HOT AND CONTACT WITH
THESE AREAS SHOULD BE AVOIDED.
This appliance is not intended for use by children or
other persons without assistance or supervision if their
physical,
sensory or mental capabilities prevent them
from using it safely. Children should be supervised to
ensure that they do not play with the appliance.
If young children, the aged or infirm are likely to be left in
the vicinity of the heater, we advise that adequate
precautions should be taken. We recommend that a
guard be fitted to ensure contact with the heater is
avoided and objects cannot be inserted into the product.
For further information, please contact our guard
supplier direct on Tel. No. 01603 667957, or in case of
difficulty or for further advice contact the Customer
Helpline.
DO NOT use the radiator if it has been dropped or
damaged or the mains lead has been damaged, until it
has been examined by a qualified engineer.
DO NOT use the radiator if it develops an oil leak. Unplug
the radiator and contact your supplier or our Customer
Help Line.
If the radiator is tipped over, unplug it and allow it to cool
before standing it back upright.
DO ENSURE that the mains lead cannot be tripped over.
DO NOT operate the radiator with the mains lead
overhanging the heated surfaces.
If the supply cord is damaged it must be replaced by a
special cord or assembly available from the
manufacturer or its service agent.
Unpacking
Follow any pack operating instructions carefully. Remove the
contents of the carton very carefully. Retain all packaging for
future use.
Preparing for use
The radiator may be used free standing with the feet fitted or
wall mounted.
The necessary feet, screws and wall mounting brackets are
provided, packed with the radiator.
Free Standing on feet (see Fig. 3)
Never use the radiator free standing without the feet fitted.
Lay the radiator on its front on a table or similar and offer each
foot up to its mounting bracket. Place each foot over the
attachment bosses and secure it using the screws and washers
provided.
Insert the four white plastic inserts into the holes in the base of
the feet.
Stand the radiator on its feet and place it in position ready for
use.
The heater should always be used on a flat stable surface.
Ensure that there is at least 75mm of clear space around the
radiator and at least 305mm between the radiator and any
overhanging shelf.
Optional castors may be fitted to the feet in place of the plastic
inserts:
Black plastic castors (4) RC9000
Metal ball castors (4) RC0291
Contact your supplier or our Customer Helpline for details.
For overall height with castors add 43mm.
Permanent wall mounting
THE RADIATOR MUST ONLY BE WALL MOUNTED USING THE
KIT SUPPLIED.
Select a suitable position on a wall, near to a mains power
outlet.
The radiator should not be mounted closer than 75mm from
the floor - see Fig. 4 (to enable cleaning), or adjacent side
walls.
Ensure at least 305mm clear space between the radiator and
any overhanging shelf.
It should not be mounted closer than 1 metre from the ceiling.
STEP 1
Check that you have all the necessary components:
(a)
2 x Bottom Wall brackets
(b)
2 x Top Wall Brackets
(c)
2 x Radiator Securing Brackets
(d)
2 x Screws Self-tapping.
STEP 2
Using a straight edge, draw a horizontal line (see 'Y' in Fig. 4)
for the bottom brackets at the required mounting height from
the floor.
NOTE: The bottom of the radiator must not be less than 75mm
from the floor. To achieve this, the top edge of the bottom
brackets must be at least 160mm from the floor – see Fig. 2.
On this line, mark off the fixing centres according to model –
see 'C' in the table in Fig. 2 and Fig. 4.
Place the bottom brackets centrally over these centres with the
top row of holes on the line, and mark the fixing hole positions
– see Fig. 4.
STEP 3
Drill the holes and fit wall plugs. Screw the bottom brackets in
position – see Fig. 4.
STEP 4
Measure dimension D in Fig. 2 according to model, from the
top of the bottom brackets and draw a horizontal line. Mark off
the fixing centres for the top brackets in line with the bottom
brackets. Place each top bracket on the line and mark the
fixing holes – see Fig. 5. Drill and plug the wall and fix the top
brackets in place.
STEP 5
Place the radiator on the bottom brackets, then fit each securing
bracket to the top of the radiator and secure it with the self-
tapping screw provided – see Fig. 6.
Check that the radiator is securely fixed to the wall.
Advertisement
