Cleaning/Warning/Warranty - Hegel H20 Owner's Manual

USE/PLACEMENT
The amplifier should be placed on a flat, hard surface for prop-
er cooling. The amplifier performs best after being switched
on for 1 hour for heating up. Plenty of space is required for air
circulation above, below and around the amplifier. The ampli-
fier must never be placed on a carpet or similar surface that
obstructs air circulation through the component. Nor must it be
covered while in use or placed on a narrow shelf or in another
confined space.
Always use the main power switch on the front panel to
switch the amplifier on and off. Never switch on or off the AC
voltage supply to the H20 or H30 with an external switch.
The amplifier will automatically switch itself off if overheated
(H20 and H30).
The amplifier will need some break-in time before maximum
sound quality can be experienced.
CLEANING
The top, side and front panels are made of bead blasted and
anodized aluminium. Fingerprints can be wiped with a damp
cloth.
NOTE/WARNING
HEGEL products must never be opened by anyone other than
certified technicians. The devices contain electronic compo-
nents that can cause electric shock. Work performed on HEGEL
products by unqualified persons can cause serious damage and
personal injury. The products must not be exposed to rain or
moisture.
WARRANTY
All HEGEL products come with a 2-year guarantee against
defective materials and workmanship.
10