1. Manuals
  2. Brands
  3. SVP Manuals
  4. Transmitter
  5. HDT-02_H.264
  6. User manual

SVP HDT-02_H.264 User Manual

H.264 high definition digital multiband- multifunction transmitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SVP
Broadcast
Microwave
HDT-02_H.264
HIGH DEFINITION DIGITAL
MULTIBAND - MULTIFUNCTION
TRANSMITTER
USER MANUAL V4.11
Accessories included in this manual:
PA-5
PA-10
AV-X03F
GPS-02
RTC-01
Antenna
Antenna
Remote Control

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDT-02_H.264 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SVP HDT-02_H.264

Summary of Contents for SVP HDT-02_H.264

  • Page 1 Broadcast Microwave HDT-02_H.264 HIGH DEFINITION DIGITAL MULTIBAND - MULTIFUNCTION TRANSMITTER USER MANUAL V4.11 Accessories included in this manual: PA-5 PA-10 AV-X03F GPS-02 RTC-01 Antenna Antenna Remote Control...
  • Page 2 Chapter 5: Web Server and SNMP This chapter provides a detailed description of the Web Server tool. This feature allows the control of the HDT-02_H.264 transmitter through a web page. Chapter 6: Remote Control The use of the RTC-01 device provides a remote connection to the HDT- 02_H.264 transmitter.
  • Page 3 We are sure that the addition of this equipment to your existing installation will cause you nothing but satisfaction. Please read these instructions carefully, and keep them at hand in case you have to refer to them. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 4: About This Manual

    <> These symbols mean that the parameter can be modified in the same screen with the right and left keys. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 5: Important Notes

    The resulting multiplexed signal is transmitted using COFDM modulation system. 4. The HDT-02_H.264 transmitter is available from 1 GHz to 6.4 GHz in three ranges (1-2.8 GHz, 2.8-4 GHz and 4-6.4 GHz) for the DVB-T2 and DVB-T RF stage and the L band for the DVB-S2 and DVB-S IF stage.

  • Page 6: Safe Operating Procedures

    4 cm. In case it is used the PA-5 (5 W power amplifier), the minimum distance is 28.2 cm and if it is used the PA-10 (10 W power amplifier) the minimum distance is 39.9cm. SVP Broadcast Microwave, in accordance with the requirements set forth by the FCC, provides this information as a guide to the user.
  • Page 7 = 28.2 cm = 11.1 in 3. HDT-02 transmitter + PA-10 (10 W) with AVF antenna G = 2 = 10000 mW EIRP = 20000 mW = 39.9 cm = 15.7 in HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 8 20 cm. As the cameraman always uses the camera in the same way and the antenna is fixed to the camera, the distance is always maintained. Conclusion: This equipment is exempted from SAR evaluation. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 9 20 cm. As the cameraman always uses the camera in the same way and the antenna is fixed to the camera, the distance is always maintained. Conclusion: This equipment is exempted from SAR evaluation. VIII HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 10 1.5 GHz, it is also exempted from the RF exposure evaluation because the maximum e.i.r.p. (200mW) is lower than 2.5 W. Conclusion: This equipment is exempted from the RF exposure evaluation. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 11 7. In the case of injuries to the mouth, it may be necessary to use mouth-to-nose resuscitation. Seal the victim’s mouth with your cheek and blow firmly into his nose, proceeding as above. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 12 DRY clean dressing. d) Oil or grease in any form should not be applied. e) If severely burnt, get the victim to hospital immediately. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 13: Table Of Contents

    3.5.2.1.15 Encoder Output ............. 60 3.5.2.1.16 TS Parameters ............61 3.5.2.2 CA-BISS Menu ............64 3.5.2.3 Mod&RF Menu ............. 66 3.5.2.3.1 DVB-T2 ..............66 3.5.2.3.2 DVB-T2 Maximum Bitrates ........69 3.5.2.3.3 DVB-T ..............70 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 14 5.2.4.3 Configuration ............112 5.2.4.4 Monitor ..............112 Web Page Setup Notes ............113 SNMP .................. 113 5.4.1 SNMP Commands ............114 Chapter 6: Remote Control ............115 Introduction ................. 115 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 15 D.1 DVB-T ..................156 D.1.1 How Does It Works ............... 156 D.2 DVB-T2 ..................157 D.2.1 How Does It Works ............... 157 D.2.2 DVB-T2 New Features ............157 D.2.3 DVB-T vs DVB-T2 ..............159 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 16 D.3 DVB-S ..................160 D.3.1 How Does It Works ............... 160 D.4 DVB-S2 ..................161 D.4.1 How Does It Works ............... 161 D.4.2 Pilots in DVB-S2 ..............165 D.4.3 DVB-S vs DVB-S2 ..............166 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 17: Chapter 1: Introduction

    The HDT-02 is the new multifunction and multiband transmitter developed by SVP Broadcast Microwave. The features of this equipment, achievable only by SVP, make this transmitter the most advanced in the market up to the date. Its feature H.264 encodes for 3G, high definition (HD) and standard definition (SD) signals with ultra-low latency.
  • Page 18 Each carrier is then modulated with a QPSK, 16QAM, 64QAM or 256QAM scheme with a constellation rotation. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 19 In addition, it also provides several bandwidths: 1.7, 5, 6, 7 and 8 MHz in case there are needed for different applications. To summarize, with all of these characteristics, the maximum bit rate achieved is 50.3 Mbps. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 20 0.20. To sum up, with all of these characteristics, the maximum bit rate achieved is 31 Msym/s. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 21 -20 to +5 dBm and a L band output that provides a 10 MHz reference oscillator. The HDT-02 digital camera transmitter uses QPSK modulation. In addition, the European ETSI EN 300421 standard defines the following Reed Solomon coding rates: 1/2, 2/3, 3/4, 5/6, 7/8. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 22: Chapter 2: Technical Features

    Composite video (PAL/NTSC) Formats: 1080p (1920x1080) – 23.98/24/25/ 29.97/30/50/59.94/60 Hz 1080i (1920x1080) – 50/59.94/60 Hz 720p (1280x720) – 23.98/24/25/29.97/ 30/50/59.94/60 Hz 576i (720x576) – 50 Hz 480i (720x480) – 59.94 Hz HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 23 High 422, High, Main Level: 3.0/3.1/3.2/4.0/4.1 Latency: Ultra Low delay: 33 ms Audio compression: MPEG-1 Layer II Audio bit rate: 128, 192, 256 or 384 Kbps Output bit rate: 1 Mbps – 100 Mbps HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 24 Front panel & display Web browser interface SNMP RTC – 01 via cable RTC – 01 via UHF (Optional) Presets: 6 user defined presets Monitoring: Encoding, modulation, frequency and output power, alarms and warnings HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 25 124 x 45 x 193 mm 4.9x1.8x7.6 in Weight: 1 Kg (without fastenings) 2.2 lb Environmental Aeronautical: RTCA / DO-160 compliant Temperature range: -10 to 45 ºC Height: 4500 m Humidity: HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 26: Chapter 3: Transmitter Operation And Menus

    When a video, audio or data input has been selected, a character connected to this input is displayed in the main screen. Next, it is shown the main screen of the HDT-02_H.264 transmitter. Frequency Transmission Standard...
  • Page 27 Standard Delay (Lipsync < 10 ms) Low delay (Lipsync < 10 ms)  3 frame Super Low Delay (Lipsync < 10 ms)  2 frame Ultra Low Delay (Lipsync = 20ms)  1 frame HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 28 Analogue Test Tone RS232 Data Table 3.1 Linkages between the input and the character displayed Next, it is shown the main screen for each output type (DVB-T2, DVB-T, DVB-S2 and DVB-S): HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 29: Main Screen For The Dvb-T2

    (Audio 1 and 2 not darkened -> enabled / darkened -> disabled) Character 4: Data input selection (None, GPS, RS232, RS485 or UDP) and  (not darkened -> enabled / darkened -> disabled) and (static -> presence / blinking -> absence) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 30 Modulation Scheme Bitrate 576/50 420S Video Input Selection Latency Encoder Video Profile Audio Inputs Selection XXX/XX Guard Interval Data Input Selection Input Video Signal Format Figure 3.2 Main screen for DVB-T2 standard HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 31: Main Screen For The Dvb-T

    (Audio 1 and 2 not darkened -> enabled / darkened -> disabled) Character 4: Data input selection (None, GPS, RS232, RS485 or UDP) and  (not darkened -> enabled / darkened -> disabled) and (static -> presence / blinking -> absence) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 32 Modulation Scheme Bitrate 1080/50p 422L Latency Video Input Selection Encoder Video Profile Audio Input Selection XXX/XX Guard Interval Data Input Selection Input Video Signal Format Figure 3.3 Main screen for DVB-T standard HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 33: Main Screen For The Dvb-S2

    Data input selection (None, GPS, RS232, RS485 or UDP) and  (not darkened -> enabled / darkened -> disabled) and (static -> presence / blinking -> absence) Video Format (1080p, 1080i, 720p, 576i, 480i) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 34 Bitrate Modulation Scheme GEAD 576/50 420S Video Input Selection Latency Encoder Video Profile Audio Inputs Selection XXX/XX Data Input Selection Input Video Signal Format Figure 3.4 Main screen for DVB-S2 standard HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 35: Main Screen For The Dvb-S

    Data input selection (None, GPS, RS232, RS485 or UDP) and  (not darkened -> enabled / darkened -> disabled) and (static -> presence / blinking -> absence) Video Format (1080p, 1080i, 720p, 576i, 480i) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 36 12.901Mb Bitrate Modulation Scheme 1080/50i 420UL Video Input Selection Latency Encoder Video Profile Audio Inputs Selection XXX/XX Data Input Selection Input Video Signal Format Figure 3.5 Main screen for DVB-S2 standard HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 37: Transmission Examples

    If it varies between a ‘G’ and a ‘g’ it means that the GPS antenna is connected and it is trying to find three localization satellites. If the ‘G’ does not vary, then it is connected to the satellites. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 38 Letter ‘E’ corresponds to embedded and letter ‘A’ to analogue. The data input has been selected to RS232 so letter ‘D’ appears in the data gap. Before the encoder profile a padlock appears when BISS encryption is activated. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 39  Encoder Video Profile: 4.2.0  Latency: Ultra Low Delay  F: 1360,500MHz DVBS P: +3.0 SR08.000 B10 QPSK 7/8 12.901Mb 1080/50i 420UL XXX/XX Figure 3.8 HDT-02 Main screen. Example 3 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 40: Leds

    The LED lights up when a change in the configuration of the device is  being processed. ON/OFF LED RF LED ALARM LED STATUS LED Figure 3.9 HDT-02 front panel LED indication HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 41: Front Panel

    If the power fails while the equipment is operating, it will restart automatically when the power returns, not being necessary to press the on/off button again. Figure 3.11 ON/OFF button HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 42: Ok Button

    Enter from the equipment main screen to the setup menu and vice  versa. Exit equipment submenus.  This button allows the user to access to the main screen from the alarms  screen. Figure 3.13 Cross button HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 43: Left And Right Button

    This buttons are also used to change, for example, the frequency and  PID parameter’s values. Pressing up and down arrows the value of those parameters can be changed, increased or decreased respectively. Figure 3.15 Up and Down buttons HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 44: Rf Button

    However, if power supply fails when RF output is enabled then, once power supply returns it is not necessary to push this button because RF output will continue being enabled. RF ON Figure 3.16 RF On/Off button HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 45: Menus

    In the next page it is shown a scheme that specifies the different menu options available. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 46 Audio 1 HDMI CVBS Embedded Analogue AES-EBU Tone.Gen None Format Format Format Status Format Bitrate Bitrate Bitrate Bitrate Delay Delay Delay Bitrate Delay Type Frequency Profile Profile Profile Format Profile Level HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 47 Encoder continued continued Audio 2 Data Embedded Analogue AES-EBU Tone.Gen None None RS232 RS485 Bitrate Bitrate Bitrate Bitrate BaudRate Type Frequency Parity Level Stop Bits HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 48 Output Mode User Parameters Bitrate Video PID Program Nº None Audio1 PID TS id BISS-1 Audio2 PID Network id BISS-E Data PID Network Name PMT PID Service Name PCR PID HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 49 Modulator Modulator Save Temp Mask Modul Modul Power Power Voltage Gateway LDPC FEC Const LDPC FEC Mode Bandwidth Roll Off Bandwidth Bandwidth Spectrum Pilots Spectrum 10 MHz Bandwidth Spectrum 10 MHz HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 50: Menu Navigation

    3.5.1 Menu Navigation This section contains a detailed description of each of the parameters that can be configured in the HDT-02_H.264 camera transmitter via the MENU. To enter the MENU, press the cross button in case of being in the principal screen or in any submenu.

  • Page 51: Menu Structure

    CA-BISS – Encryption of signals can be configured in this option. Mod&RF – DVB-T2/T/S2/S transmission parameters are set in this section. Unit – Characteristics owned to the HDT-02 transmitter are accessed here. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 52: Encoder Menu

    OK button, the output bitrate can be configured. The field number six consists on the configuration of the parameters of the Transport Stream. In this option, the different program identifiers are configured. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 53: Sdi Input

    In this field, the codification profile can be configured. So as to select the wanted profile, press Right, Left arrows buttons. (eligible parameter) The available options are: 4.2.2  4.2.0  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 54 (1080p, 1080i, 720p). If any other video input (SDI, CVBS or ASI) is selected, then the transmitter automatically captures its format and the frame rate. If the video format is changed, the time detection of this new format is less than 15 seconds. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 55: Hdmi Input

    In this field, the codification profile can be configured. So as to select the wanted profile, press Right, Left arrows buttons. (editable parameter) The options available are: 4.2.2  4.2.0  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 56 In this field, the group of figures parameter is displayed. It specifies the order in which intra- inter-frames are arranged. (eligible parameter) The available options are: Auto  Manual (editable parameter)  Table 3.7 HDMI Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 57: Cvbs Input

    In this field, the codification profile can be configured. So as to select the wanted profile, press Right, Left arrows buttons. (eligible parameter) The available options are: 4.2.2  4.2.0  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 58 In this field, the group of figures parameter is displayed. It specifies the order in which intra- inter-frames are arranged. (eligible parameter) The available options are: Auto  Manual (editable parameter)  Table 3.8 CVBS Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 59: Asi Input

    In this field it is shown the format of the ASI input signal. (reading parameter) The available options are: 188 bytes  204 bytes  Table 3.9 ASI Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 60: Generator Input

    In this field, the codification profile can be configured. So as to select the wanted profile, press Right, Left arrows buttons. (eligible parameter) The available options are: 4.2.2  4.2.0  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 61 In this field, the group of figures parameter is displayed. It specifies the order in which intra- inter-frames are arranged. (eligible parameter) The available options are: Auto  Manual (editable parameter)  Table 3.10 Generator Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 62: Audio1 Embedded

    Table 3.11 Audio Embedded Input menu options If the video option selected is CVBS, ASI or Test Pattern generator then, the option of audio embedded will be blinking because that configuration is not possible. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 63: Audio1 Analogue

    So as to choose the type of audio1, press Right, Left buttons. (eligible parameter) The available options are: Line  Mic Dynamic  Mic Phantom  Table 3.12 Audio Analogue Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 64: Audio1 Aes-Ebu

    1. So as to select the desired bitrate, press Right, Left arrows buttons. (eligible parameter) The available options are: 128K  192K  256K  384K  Table 3.13 Audio AES-EBU Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 65: Audio1 Tone.gen

    In this field, the frequency of the generated tone is displayed. (reading parameter) Level (dBFs): In this field it is displayed the level in dBF of the generated tone. (reading parameter) Table 3.14 Audio Generator Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 66: Audio2 Embedded

    Table 3.15 Audio Embedded Input menu options If the video option selected is CVBS, ASI or Test Pattern Generator then, the option of audio embedded will be blinking because that configuration is not possible. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 67: Audio2 Analogue

    So as to choose the type of audio2, press Right, Left buttons. (eligible parameter) The available options are: Line  Mic Dynamic  Mic Phantom  Table 3.16 Audio Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 68: Audio2 Aes-Ebu

    2. So as to select the desired bitrate, press Right, Left arrows buttons. (eligible parameter) The available options are: 128K  192K  256K  384K  Table 3.17 Audio AES-EBU Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 69: Audio2 Tone.gen

    In this field, the frequency of the generated tone is displayed. (reading parameter) Level (dBFs): In this field it is displayed the level in dBF of the generated tone. (reading parameter) Table 3.18 Audio Generator Input menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 70: Data

    If it is wanted to send data to the transmitter through a RS485 connection, this option must be selected. UDP: If it is wanted to send data to the transmitter through UDP, this option must be selected. Table 3.19 Data Parameters HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 71 Height of the transmitter: The height of the transmitter from ground is specified in this value. Satellite Level: The level of each satellite signal received is shown in this field. Date: Updated date is shown. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 72: Encoder Output

    (modulation scheme, FEC) then, in the main screen the line (third line) in which these parameters (modulation scheme, FEC, bitrate) appear blinks. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 73: Ts Parameters

    Data PID: 2100 Audio1 PID: PMT PID: Audio2 PID: PCR PID: ENCODER TS ENCODER TS Program Nº: Network Name TS id: 7 Service Name Network id: Figure 3.34 Encoder TS Menu HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 74 Here the program number must be entered. So as to change its value first, press the OK button and then, with the UP, Down arrows select the number wanted. Press the OK button so as to save the value introduced. (editable parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 75 With the Right, Left keys, the user can select the character of the word. Press the OK button so as to save the value introduced. (editable parameter) Table 3.21 Encoder TS menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 76: Ca-Biss Menu

    In this field, the SW password must be introduced, which is valid for BISS-1 and BISS-E encryption. (editable parameter) User: In this field, the User password must be introduced, which is valid only for BISS-E encryption. (editable parameter) Table 3.22 CA-BISS menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 77 0 to 9 or A to F. 7. Press OK button to set the User. BISS encryption is activated in the modulator and in the ASI output. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 78: Mod&Rf Menu

    LDPC Fec: 2/3 <> Pwr: High < GI: 1/8 (PP2) <> > Modul: 256QAM <> Mode: 8K Ext <> DVB-T2 & RF Bandwidth: 8MHz <> Figure 3.37 DVB-T2 & RF Menu HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 79 Here the value of the Forward Error Correction can be chosen. Use Right, Left buttons so as to select the desired value. (eligible parameter) The available options are:       HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 80 Right, Left buttons so as to select the desired value. (eligible parameter) The available options are: 1.7 MHz  5 MHz  6 MHz  7 MHz  8 MHz  Table 3.23 DVB-T2 & RF menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 81: Dvb-T2 Maximum Bitrates

    11.3 11.7 14.5 17.5 19.4 16 QAM 21.8 23.3 24.3 21.5 25.9 28.8 64 QAM 32.4 34.6 36.0 29.0 34.9 38.8 256 QAM 43.7 46.6 48.6 Table 3.24 DVB-T2 Maximum Bitrates HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 82: Dvb-T

    Here the constellation of the modulation can be chosen. Use Right, Left buttons so as to select the desired constellation. (eligible parameter) The available options are: QPSK  16QAM  64QAM  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 83 Use Right, Left buttons so as to select the desired option. (eligible parameter) The available options are: Normal  Invert  Table 3.25 DVB-T & RF menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 84: Dvb-T Useful Bitrate

    In the following tables, the values in italics are approximate values for the given channel bandwidth. Table 3.26 Useful bitrate (Mbit/s) for non-hierarchical systems in 8 MHz channels Table 3.27 Useful bitrate (Mbit/s) for non-hierarchical systems in 7 MHz channels HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 85 Table 3.28 Useful bitrate (Mbit/s) for non-hierarchical systems in 6 MHz channels Table 3.29 Useful bitrate (Mbit/s) for non-hierarchical systems in 5 MHz channels HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 86: Dvb-S2

    <> Power: +0.0dBm SR: 12.4MS/s BW:14 DVB-S2 & RF DVB-S2 & RF Roll Off: 0,20 <> 10MHz: On <> Pilots: ON <> Spectrum: Normal <> Figure 3.39 DVB-S2 & RF Menu HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 87 Here the constellation of the modulation can be chosen. Use Right and Left buttons so as to select the desired constellation. (eligible parameter) The available options are: QPSK  8PSK  16APSK  32APSK  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 88 In this field, the value of the symbol rate can be introduced. (editable parameter) In this field it is displayed the value of the bandwidth of the transmitted signal. (reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 89 This feature provides a reference signal of 10MHz to the satellite up- converter in case of being ON. (eligible parameter) The available options are:   Table 3.30 DVB-S2 & RF menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 90: Symbol Rate Calculation

    Next, it is shown a table as an example of the Symbol Rate values for a determined Bandwidth of 28 MHz. Bandwidth (MHz) Roll-off Symbol Rate (Msymb/s) 0.20 23.33 0.25 22.4 0.35 20.74 Table 3.31 Symbol Rate calculation HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 91 DVB-S & RF Freq: 1.360,500MHz FEC: 7/8 <> Modulator ON <> SR: 12.4MS/s BW:14 Power: +0.0dBm Spectrum: Normal <> DVB-S & RF 10MHz: On <> Figure 3.40 DVB-S & RF Menu HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 92 Right and Left buttons so as to select the desired value. (eligible parameter) The available options are:      In this field, the value of the symbol rate can be introduced. (editable parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 93 This feature provides a reference signal of 10MHz to the satellite up- converter in case of being ON. (eligible parameter) The available options are:   Table 3.32 DVB-S & RF menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 94 In order to load a desired profile, go to the load option, select the desired profile to be loaded with the Right, Left buttons and press OK button so as to load it. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 95: Alarms

    (values from 0 to 3) where 0 means that the fans are stopped and value 3 is the maximum speed. (Reading parameter) Voltage: In this field, the voltage of the transmitter is shown. (Reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 96 Right and Left keys. Press the OK button so as to save the value introduced. (editable parameter) MAC ADDRESS (Reading parameter) Table 3.33 Unit Ethernet menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 97 The rest of the characters are important for the manufacturer but are not important for the user. Table 3.34 Unit Rev menu options HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 98 Next, they are explained the necessary steps so as to make a successful update. The latest firmware is allocated in the webpage of SVP Broadcast Microwave. So as to access to the firmware file, first enter to www.svpbm.com in your web browser.
  • Page 99 Click on Software. Figure 3.47 Updating firmware step 3 Go to HDT-02_Firmware. Figure 3.48 Updating firmware step 4 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 100 Now, automatically the device updates the firmware. The screens which are shown below display the different steps that the device is making while the updating process. Don’t power off the device during the updating process. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 101: Dist Units

    If the option On is selected then, each time a key is pressed a beep sound will appear. If option Off is selected then, there will be no sound when a key is pressed. (eligible parameter) The available options are:   HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 102: Chapter 4: Gps Application

    Next it is explained the value of the data field which appears in the main screen of the HDT-02 transmitter. F: 1250,00MHz DVBT P: +5dBm FFT8K QPSK 3/4 1/16 -------- 422L Figure 4.2 Main screen XXX/XX HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 103: Gps Transmitter Screen

    Direction of the transmitter: The direction of the transmitter is shown in this field. Longitude of the transmitter: Specifies the longitude position of the transmitter. Height of the transmitter: The height of the transmitter from ground is specified in this value. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 104: Gps Hdr-106 Receiver Screen

    Latitude of the transmitter: Specifies the latitude position of the transmitter. Speed of the transmitter: Shows the speed of the transmitter in knot . Direction of the transmitter: The direction of the transmitter is shown in this field. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 105 Latitude of the receiver: In this field the user can enter the latitude of the receiver. Longitude of the receiver: In this field the user can enter the longitude of the receiver. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 106: Application Example 1 – Constant Positioning

    HDR-106 shows in its screen some GPS value like: - Transmitter positioning - Transmitter direction - Distance from receiver to transmitter Above this paragraph a picture of this system is shown: HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 107 Receiver HDR-106 RS232 connection HDT-02_H.264 transmitter with GPS antenna E20º45.512´ 10k47º1mt 04/10/13 N60º73.984´ S3 100km 100º 09:45:34 PC with Google Maps HDR-106 GPS screen Figure 4.4 GPS system example 1 picture HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 108: Chapter 5: Web Server

    Down keys select the desired number. So as to change from one character to another, press Right, Left keys. Press the OK button so as to save the value introduced. UNIT ETHERNET LOC 192.168.001.010 MSK 255.255.000.000 GAT 192.168.001.001 Figure 5.3 Subnet Mask HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 109: Web Page Overview

    Figure 5.4 Gateway Once the IP, Subnet Mask and Gateway are set and the laptop or PC is connected to the HDT-02_H.264, open the web browser and tip the IP given to the transmitter. Press enter button in your computer and then the main screen will appear.
  • Page 110 Here the format of the video input signal is displayed. If there is no video input then the message ‘not detected’ is displayed. (reading parameter) - Bitrate: In this field the bitrate of the input signal in Mbps is displayed. (reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 111: Audio

    This DID is elegible from group 1 to group 4. (eligible parameter) 5.2.1.3 Data - Input: Select the type of data introduced to the device. The available options are None, GPS, RS232, RS485 and UDP. (eligible parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 112 The format of the GPS coordinates used is decimal minutes as shown in the next example: N43º02.032’ W023º03.023’ - Status: The status of the GPS input is displayed in this field. (reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 113 Here the program map tables packet identifier must be entered. (editable parameter) - PCR PID: Here the program clock reference packet identifier must be entered. (editable parameter) - Program Number: Here the program number must be entered. (editable parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 114 FEC, IG, BW used, so as to the video bitrate can be always the maximum allowed. SVP advises to use the automatic mode when the signal is transmitted through RF. Manual mode is useful when the device is used as an encoder so as to configure the desired output bitrate in the ASI output.
  • Page 115 DVB-T2, DVB-T, DVB-S2 and DVB-S. (eligible parameter) - RF Status: Select ON in case of wanting to activate the RF transmission or press OFF button so as to deactivate it. (eligible parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 116 Enter the transmitted signal bandwidth. The available options are 5, 6, 7, 8 MHz. (eligible parameter) - Bitrate: The bitrate of the transmitted signal is displayed in this field. (reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 117: Dvb-T2

    1/2, 3/5, 2/3, 3/4, 4/5, 5/6. (eligible parameter) - GI: Select the guard interval of the transmitted signal. The available options are 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128. (eligible parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 118 Enter the transmitted signal bandwidth. The available options are 1.7, 5, 6, 7, 8 MHz. (eligible parameter) - Bitrate: The bitrate of the transmitted signal is displayed in this field. (reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 119: Dvb-S2

    (LDPC FEC options are: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10) (eligible parameter) - Roll Off: In this field the value of the roll off factor can be chosen. The available options are 0.20, 0.25, 0.35. (eligible parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 120 (reading parameter) - 10 MHz: 10 Mhz reference oscillator mode ON or OFF. This feature provides a reference signal to the satellite up-converter in case of being ON. (eligible parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 121 1/2, 2/3, 3/4, 5/6, 7/8. (eligible parameter) - Symbol Rate: In this field the value of the symbol rate of the transmitted signal can be selected. (From 2 to 45Mbaud/s) (editable parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 122 0 to 9 and from A to F. (editable parameter) - User ID: User ID for BISS-E. The values of each characer introduced can be from 0 to 9 and from A to F. (editable parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 123: Unit

    The LED lights up in red when any alarm occurs. o The different alarms that can appear in the transmitter are: Voltage High.  Voltage Low.  Temperature High.  ASI Overflow.  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 124: Alarms (Reading Parameter)

    (Reading parameter) - S/N: In this field, the serial number of the device is displayed. (Reading parameter) - Model: In this field, the model of the device is displayed. (Reading parameter) HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 125: Snmp

    SNMP is an application-layer protocol and it runs over UDP at the transport level. SNMP is based on a manager / agent model as it is shown below: HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 126: Snmp Commands

    Station SNMP agent Figure 5.13 SNMP management system The SNMP agent used is MIB-II compliant. The SVP MIB (Management Information Database) provides a standard representation of the SNMP Agent’s available information and where it is stored. The MIB is defined according to the ASN.1.

  • Page 127: Chapter 6: Remote Control

    6.1 Introduction This equipment, called RTC-01, is a compact lightweight remote control for SVP Broadcast Microwave systems. It can control the HDR-106 receiver and the HDT-02 transmitter. The configuration and the control of the equipment can be carried out easily using the RTC-01.

  • Page 128: Application Example

    Above this paragraph a picture of this system is shown: HDT-02+ PA-10 or PA-5 Situated at the deck of the aeroplane RTC-01 Situated at the cockpit Figure 6.4 RTC system example picture HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 129: Chapter 7: Equipment Installation

    RF Output (L band) DATA/GPS ASI Out Ethernet Power DC Figure 7.1 HDT-02 Connections The following figures show the HDT-02 front and rear panel. Connections mentioned in the upper figure are shown below. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 130 Figure 7.2 HDT-02 front panel Figure 7.3 HDT-02 rear panel HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 131 Audio 1 Audio 2 Data / GPS RTC Video D.C. Power Supply Ethernet HDMI ASI-IN ASI-OUT Figure 7.5 HDT-02 rear panel Technical features of each connection are described on the following sections. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 132: Input Connections

    Input voltage range 7-36 V. Consumption 20 Watt. Table 7.1 Power supply connection technical features Pinout of the cable connector (Watched from the soldering side) Description Table 7.2 Power supply cable connector pinout HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 133: Cvbs/ Sdi/ Hdmi/ Asi Input

    7.2.1.2 CVBS/ SDI/ HDMI/ ASI Input The HDT-02_H.264 transmitter incorporates a HDMI input so as to allow that new devices can be connected. SD-SDI digital video input is compatible with SMPTE-259M Standard, HD- SDI digital video input signal type is SMPTE-292M compliant and 3G-SDI digital video input signal type is SMPTE-425M compliant.
  • Page 134 Table 7.6 SDI input signal connection features ASI IN connection technical features Item Features Connector label ASI-IN Connector type Impedance 75 Ω Standard EN50083-9 Maximum Bitrate 216 Mbps Table 7.7 DVB-ASI Transport Stream input connection features HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 135: Audio Inputs

    Audio channel number Connector labels AUDIO 1 AUDIO 2 Connector type 5 pin Lemo 0B Cable connector part number FGG.0B.305.CLAZ Manufacturer Lemo Table 7.8 AES/EBU and analogue audio input connection technical features HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 136 Pinout of the cable connector (Watched from the soldering side) Description A1L+ / AES1P A1L- / AES1N A1R+ A1R- Table 7.9 AES/EBU and analogue audio cable connector pinout HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 137: Data/Gps Input

    Table 7.10 Data/GPS input connection technical features Pinout of the cable connector (Watched from the soldering side) Description Ground DATA NOT USED +5Vd_GPS PA_ON/OFF PA_DIRECT Table 7.11 Data/GPS cable connector pinout HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 138: Rtc Connection

    Cable connector part number FGG.0B.304.CLAZ Standard RS-485 Table 7.12 RTC connection technical features Pinout of the cable connector (Watched from the soldering side) Description Ground RTC(+) RTC(-) +Vcc Table 7.13 RTC cable connector pinout HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 139 The connector used is a RJ-45. Ethernet connection technical features Item Features Connector Label Ethernet Connector type RJ-45 Table 7.15 Ethernet input connection technical features HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 140: Output Connections

    4 to 6.4 GHz frequency range L band Impedance 50 Ω Impedance 50 Ω Output power Maximum: 10 mW Output power Maximum: +5dBm Table 7.16 RF output connections characteristics HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 141: Asi Output

    ASI connection technical features Item Features Connector label ASI-OUT Connector type BNC female Impedance 75 Ω Standard EN50083-9 Maximum Bitrate 100 Mbit/s Table 7.17 DVB-ASI Transport Stream output connection features HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 142: Mechanical Accessories

    7.3.1 Transmitter Fastening One of the accessories of the HDT-02_H.264 is the transmitter fastening which allows the device to be fixed to another item (for example an helicopter). This accessory also allows the fastening of the PA-5 or PA-10 power amplifiers to another item.
  • Page 143 Dimensions: 17.3x14.2 cm / 6.8x5.6 in Weigh: 126 gr / 4.4 oz Figure 7.5 Part Number: CLTX01 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 144: Battery Fastening

    This item allows connecting a battery (V type or Anton Bauer) to the transmitter’s case. The type of the battery fastening must be defined when the transmitter is ordered. Figure 7.7 V type battery fastening HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 145: Index A - Pa-5 And Pa-10 Power Amplifiers

    6. The equipment has a two-year warranty that covers any failure and manufacturing defect, providing it is not handled by anyone other than SVP Broadcast Microwave personnel and has not been unsealed. Figure A.1 PA-5 power amplifier Figure A.2 PA-10 power amplifier HDT-02_H.264 High Definition Digital Camera Transmitter...

  • Page 146: A.1 Introduction

    The equipment is fed with DC power supply from 11 to 36V. It is powered through DC power supply connector. An excellent design, mechanical and electronic assembly make the PA a robust and reliable solution. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 147: A.2 Technical Features

    17x12.2x3.6 cm without heatsink 6.7x4.8x1.4 in without heatsink 17x12.2x7.2 cm with heatsink 6.7x12.2x2.8 in with heatsink PA-10_4.4G: 34x24.4x7.2 cm without heatsink 13.4x9.6x2.8 in without heatsink 34x24.4x10.8 cm with heatsink 13.4x9.6x4.3 in with heatsink HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 148 -30 dBc typ, 8 MHz COFDM (PA- 10_3.1G model) Supply voltage 12 – 30 VDC at connector Protection Short circuit Capabilities Reverse voltage Low output power warming Operating 0-95% non-condensing humidity environment HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 149 All types of PA-5: dimensions 13.5x9x3.6 cm without heatsink 5.3x3.5x1.4 in without heatsink 13.5x9x7.2 cm with heatsink 5.3x3.5x2.8 in with heatsink Connectors RF: N-Female standard (another under request) DC and Control: Amphenol PTO, 4-pin HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 150 -30 dBc typ, 8 MHz COFDM (PA- 5_6.2G model) Supply voltage 12 – 30 VDC at connector Protection Short circuit Capabilities Reverse voltage Low output power Operating 0-95% non-condensing humidity environment HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 151: A.2.2 Connections

    Table A.1 DC Power supply and Control connector pinout Connector needed 12-30V DC Black 7 pin Lemo 0B CC/T/VIDEO 4 pin Amphenol PTO of the HDT-02 Figure A.3 Amphenol PTO 4-pin female connector HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 152 RF IN and OUT connector N female type connector in all of the available amplifiers for RF input and output. Conector needed Figure A.4 N male connector HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 153: A.2.3 Thermal Protections

    The fan is activated when temperature exceeds a determined value. Figure A.5 Front view of the PA COFDM Amplifier. PA-5 Model Figure A.6 Front view of the PA COFDM Amplifier. PA-10 Model HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 154: A.2.4 Before You Connect The Device

    4. Before you connect the amplifier, check that the antenna, cables and connectors are in perfect condition. Do not switch on the device if it does not adapt to more than 10dB. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 155: A.2.5 Installation

    There are two possible configurations to connect the HDT-02 transmitter and the power amplifier: The amplifier above the transmitter throughout an interface item.  Both of the devices placed separately.  HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 156 (both PA 10 and PA 5) above the HDT-02. Next, there are shown this configuration and the sheet plane. Figure A.8 Interface sheet HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 157 Dimensions: 17.3x12.4 cm / 6.8x4.9 in Weigh: 106 gr / 3.7 oz Figure A.9 Part Number: CLTX02 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 158 Planes of these supports are shown below. Figure A.10 Devices placed separately (HDT-02_H.264 & PA-10) Figure A.11 Devices placed separately (HDT-02_H.264 & PA-5) HDT-02_H.264 High Definition Digital Camera Transmitter...
  • Page 159 Dimensions: 17.3x14.2 cm / 6.8x5.6 in Weigh: 126 gr / 4.4 oz Figure A.12 Part Number: CLTX01 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 160 Dimensions: 13.5x11.1 cm / 5.3x4.4 in Weigh: 123 gr / 4.3 oz Figure A.13 Part Number: CLTX03 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 161: A.3 Power Amplifier Control

    The new power amplifiers allow the user to control automatically the power that these devices provide. RF ON In order to achieve this characteristic, it is necessary to have the RF ON button switched on and set the output power to PA. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 162: Index B – Avf X03 Flexible Antenna

    This antenna has 3dBi gain and the operating frequency range is from 1.3 to 7.5 GHz. The AVF-X03 antenna is made of brass, stainless steel and Teflon. The figure below shows the AVF-X03 antenna: Figure B.1 AVF-X03 antenna HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 163: B.2 Technical Specifications

    AVF-303L, AVF-303LB (3.4 to 3.7 GHz) AVF-403L, AVF-403LB (4.4 to 5.9 GHz) AVF-603L, AVF-603LB (6.0 to 7.5 GHz) Table B.1 AVF-X03 antenna technical features The figure below shows antenna adaptation: Figure B.1 S11 parameter measurement HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 164 Figure B.2 Horizontal and Vertical Radiation patterns HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 165: Index C – Gps Antenna

    It’s very useful to know the position of the helicopters, motorcycles, mobile units, wireless cameras etc. It has a direct connection to the SVP equipments. The HDT-02 and HDT-70 have a connector incorporated to the GPS.

  • Page 166: C.2 Technical Specifications

    Ultrasonic welded, fully waterproof Built in antenna Highly-reliable ceramic path SBAS 1 channel (Waas, Egnos, Msas) Update rate 1 Hz Protocol NMEA V3.01 Power consumption 50 mA Table C.1 GPS antennatechnical features HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 167 Antenna Tx Antenna Rx with down converter HDR-106 HDT-02 GPS Antenna RS-232 at 9600 baud PC with Google Maps Figure C.2 Link with GPS scheme HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 168: Index D – Modulation Standards

    - Can operate in 6, 7 or 8MHz channel bandwidths. Using different combinations of the above parameters a DVB-T network can be designed to match the requirements of the network operator, finding the right balance between robustness and capacity. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 169: D.2 Dvb-T2

    LDPC codes with BCH codes. LDPC codes allow a close performance to Shannon limit and the BCH codes are used so as to eliminate the floor error of the LDPC codes. Figure D.2 LDPC and BCH codes HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 170 This means that with only one component (the I or the Q one) it is possible to know exactly the symbol to which it belongs to. This new feature provides additional robustness for low order constellations. Figure D.3 Constellation Rotation HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 171: D.2.3 Dvb-T Vs Dvb-T2

    40 Mbit/s Max. Data rate (@20 dB 31.7 Mbit/s (using 8 MHz) 45.5 Mbit/s (using 8 MHz) C/N) Required C/N ratio (@24 16.7 dB 10.8 dB Mbit/s) Table D.1 DVB-T vs DVB-T2 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 172: D.3 Dvb-S

    This operation is called rate adaptation. DVB-S uses QPSK modulation and concatenated error protection based on a convolutional Viterbi code and a shortened Reed Solomon code. Figure D.5 Future Extension Frames HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 173: D.4 Dvb-S2

    16APSK and 32APSK, requiring a higher level of C/N, are mainly targeted at professional applications such as news gathering and interactive services. Figure D.6 New DVB-S2 modulation schemes HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 174 The FEC system is based on concatenation of BCH (Bose, Chaudhuri – Hocquengham) with LDPC (Low density Parity Check) inner coding. Figure D.7 DVB-S2 FEC HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 175 VCM allows optimizing the parameters of each stream to get the best performance for each receive station, instead of dimensioning the whole link according to the smallest station. Figure D.8 VCM mode HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 176 - The ability to carry several signals on a single satellite carrier, without multiplexing in front of the modulator. This is called Multi- Stream. - The ability to carry signals other than MPEG transport stream. This is called Generic Stream. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 177: D.4.2 Pilots In Dvb-S2

    - At low data rates. - When distortion is present on the signal for example due to non- linearity. - When using one of the following ModCods: 8PSK 3/5 and 2/3 16APSK 3/4 32APSK 3/5 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...

  • Page 178: D.4.3 Dvb-S Vs Dvb-S2

    Next there are shown a series of comparisons between DVB-S and DVB-S2 standards. DVB-S vs DVB-S2 Performance Figure D.10 DVB-S vs DVB-S2 Performance In the figure above it is shown how the DVB-S2 standard is really close to the Shannon limit. HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 179 QPSK – 8PSK – 16APSK – 32APSK 35% and 25% Roll-off carrier 20% Roll off carrier Consumer LNB’s work in QPSK only Pilot tones for extra synch in 8PSK Table D.2 Main differences between DVB-S and DVB-S2 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 180 Division Multiplexing Direct current DVB-S2 Digital Video Broadcasting by Satellite – Second Generation DVB-T Digital Video Broadcasting – Terrestrial DVB-T2 Digital Video Broadcasting – Terrestrial Second Generation ETSI European Telecommunications Standards Institute HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 181 High-Definition Multimedia Interface High Definition Receiver High Definition Transmitter Intermediate Frequency Interval Guard Internet Protocol Liquid Crystal Display Light-Emitting Diode Low Delay MPEG Moving Picture Experts Group NLOS Non Line of Sight HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 182 Packet Identification Quadrature Amplitude Modulation QPSK Quadrature Phase-Shift Keying RadioFrequency Remote Control Standard Delay Serial Digital Interface SNMP Simple Network Management Protocol Thin-Film Transistor Transport Stream User Datagram Protocol Universal Serial Bus HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 183 HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 184 Notes HDT-02_H.264 High Definition Digital Camera Transmitter USER’S MANUAL V4.11...
  • Page 185 Final note SVP Broadcast Microwave S.L. is constantly striving to improve all of its products. Therefore, we ask you to understand that modifications may occur in designs, equipment and technology. Consequently, no responsibility can be derived from the information, illustrations or descriptions contained in this manual.
  • Page 186 SVP Broadcast Microwave reserves the right to make changes to this manual and to the equipment without prior notice. Broadcast Microwave C/ Zubiaurre 7 bajo 48215 Iurreta Vizcaya – España Tel: (+34) 94620 3722 info@svpbm.com www.svpbm.com...

This manual is also suitable for:

Hdt-02

Table of Contents