PROBLEM
10. Motor will not start.
(Continued)
11. Motor stops.
12. Air Blower does not operate.
*Note:
The skills and tools necessary for the safe repair of this spa require the services of qualified
service personnel. Contact your Jacuzzi Whirlpool Bath Authorized Service Agent or Dealer.
TROUBLESHOOTING GUIDE
PROBABLE CAUSE
H. Subnormal voltage.
I. Locked shaft or impeller.
J. Motor windings burned out.
K. Defective starting switch inside
motor.
A. Motor overload condition.
B. Selector switch failure.
C. Relay failure.
D. Inadequate supply wiring.
E. High temperature safety
switch tripped.
A. Power off.
B. ACCESSORY switch in OFF.
C. House circuit breaker tripped,
no power to system.
D. GFCI tripped.
E. Faulty motor.
REMEDY
H. Call an electrition or your power com-
pany.
I. *
J. *
K. *
A. Let cool for one hour. Motor overload will
reset; if problem persists, see *Note.
B. *
C. *
D. Consult electrician to correct wiring to
unit.
E. Reset button on heater after water has
cooled; see *Note if switch continues to
trip.
A. Turn on power at service panel.
B. Select other function.
C. Reset circuit breaker.
D. Reset GFCI.
E. *
18