Timer; Setting The Cooking Time; Automatic Time Limit; Basic Settings - Siemens ET6..RF Series Instruction Manual

Timer

Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.

Setting the cooking time

Use the symbol to select the hotplate.
§
Set the heat setting.
1.
Touch the 0 symbol. ‹‹
2.
back hotplates and the lamp above them flashes. The lamp
of the timer indicator for the hotplate lights up.
x
Touch the + or - symbol. The default value appears.
3.
+ symbol: 30 minutes
- symbol: 10 minutes


Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator Function
™‚ Automatic childproof lock
Switched off.*
‹
‚ Switched on.
Audible signal
™ƒ
‹ Confirmation signal and operation error signal switched off.
Only operation error signal switched on.
‚
ƒ Confirmation signal and operation error signal switched on.*
Automatic time limit
™†
‹ basic setting - switches off after 1 - 10 hours.
half of basic setting - switches off after 0.5 - 5 hours
‚
ƒ quarter of basic setting - switches off after 0.25 - 2.5 hours
Duration of the timer end signal
™‡
‚ 10 seconds.*
30 seconds
ƒ n
1 minute.
„
*Basic setting
appears in the displays for the

and flash alternately in the
" ‰
Touch the + or - symbol until the desired cooking time
4.
appears in the display.
After 5 seconds, the timer starts counting down. The displays
show the heat settings again.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
lights up in the hotplate display. A signal sounds. Touch the
‹
symbol. The displays go out and the audible signal ceases.
0
Displaying the cooking time
Use the symbol to select the hotplate. Touch the
§
The remaining cooking time is displayed for 5 seconds.
Changing or cancelling the cooking time
Use the symbol to select the hotplate. Touch the
§
and use the - or + symbol to change the cooking time or to set
to .
‹‹
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
symbol.
0
symbol
0
7