Advertisement
1 - FAN VENTILATION
- Ensure this vent is not blocked, as the Power Supplies in the unit need sufficient ventila-
tion in order to not overheat
2 - MAIN 12VDC INDICATOR / FUSE
- Main and Backup (if Applicable) PC power fuse and power indicator
3 - SECONDARY 12VDC INDICATOR / FUSE
- Touch Screen PC, KVM, and NET HUB power fuse and power indicator
4 - Power Button
- Push this button to turn the power on for the 12V Power Supplies. The button will be lit
when the power is on
5 - E-STOP LINK IN PORT
- connect the main emergency stop system through this port
6 - E-STOP LINK OUT PORT
- Used to connect the SceneControl Console to the Emergency Stop System. Connect this
port to the rear of the SceneControl Unit.
7 - MAIN PC POWER OUTLET
- Used to supply power to the main PC(s) and devices within the Console.
8 - POWER INLET
- Connect the Back-UPS unit to this port to provide the unit with AC Power.
9 - MONITOR POWER OUTLET
- used to supply power to the monitors (NOT USED FOR SC5300).
10 - NET-1
- Network 1 pass through ports
11 - NET-2
- Network 2 pass through ports
SceneControl
®
5000 HARDWARE
SceneControl
®
5000 HARDWARE
11
Advertisement
