Connections; Use The Optical Socket; Use The Aux Socket - Teac SB303 User Manual

First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective
tab to activate the remote control battery.
Replace the Remote Control Battery
1 Pull out the battery tray and remove the old battery.
2 Place a new CR2025 battery into the battery
tray with correct polarity (+/-) as indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not to be used
•
for a long time (more than a month), remove
the battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the
•
batteries with new ones.
Do not use any batteries other than those specified.
•
Do not heat or disassemble batteries.
•
Never throw them in fire or water.
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to
•
short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
•

Connections

Use the OPTICAL Socket

- Remove the protective cap of the OPTICAL socket, then connect an OPTICAL cable (not
included) to the TV's OPTICAL OUT socket and the OPTICAL socket on the unit.
Tip: If there is no sound come out of the soundbar and the indicator light flash fast. Make sure
the audio setting of your source player (e.g. DVD player, game player, TV) is setted to PCM
with optical input.
Use the AUX Socket
OPTICAL cable
RCA stereo audio cable
8
TV
TV