Connections - Teac SX Owner's Manual

Cd music system
Table of Contents

Advertisement

Available languages

Available languages

Connections

CAUTION:
< Switch off the power before making connections.
< Read the instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the
connection cords.
A
8
B C D
E
A
FM antenna
While in FM mode, tune in an FM station and extend the lead to find the
best position for the reception. This antenna may need to be repositioned
if you move your unit to a new location.
B
PHONES
For private listening, insert the headphones plug into this jack, and adjust
the volume using the VOLUME button.
C
AUX IN
You can connect a portable audio player to this jack.
Connect the LINE OUT or PHONES jack (audio output jack) of the player
using the supplied stereo mini plug cable.
When using the PHONES jack of your mini player, you must adjust the
volume of the mini-player or you may hear no sound from your SX.
< Turning the volume of the mini player up too high may cause the sound
from your SX to be distorted. If this is the case, reduce the volume of the
mini player until the distortion stops and then adjust the volume level of
the SX to a comfortable listening level
D
DST (Daylight Saving Time)
Select ON to put the clock one hour ahead. Select OFF to turn the DST off.
E
AC Power Cord
Plug this AC power cord into an AC wall socket.
< Be sure to connect the power cord to an AC outlet which supplies the
correct voltage.
< Hold the power plug when plugging or unplugging the power cord. Never
pull or yank on the power cord.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents