Internal Memory Module - HP Compaq 6710s Maintenance And Service Manual

Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and
7.
disconnect the keyboard cable (2) from the system board.
Remove the keyboard.
8.
Reverse this procedure to install the keyboard.

Internal memory module

Description
2048-MB, PC2-5300, 1-DIMM, memory module
1024-MB, PC2-5300, 1-DIMM, memory module
512-MB, PC2-5300, 1-DIMM, memory module
Before removing the internal memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory/WLAN module compartment cover (see
5.
on page
Release the keyboard (see
6.
Remove the internal memory module:
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
1.
(The edge of the module opposite the slot rises away from the computer.)
66 Chapter 4 Removal and replacement procedures
Battery on page
56).
Keyboard on page
48).
Expansion memory module
64).
Spare part number
417506-001
414046-001
414045-001
ENWW