Backup And Recovery In Windows Vista; Creating Recovery Discs - HP Compaq 6710s Maintenance And Service Manual

Backup and recovery in Windows
8
Vista

Creating recovery discs

After setting up the computer for the first time, be sure to create a set of recovery discs of the full factory
image. The recovery discs are used to start up (boot) the computer and recover the operating system and
software to factory settings in case of system instability or failure.
Note the following guidelines before creating recovery discs:
You will need high-quality CD-R, DVD-R, or DVD+R media (purchased separately).
●
NOTE:
& Recovery Manager.
● The computer must be connected to AC power during the process.
Only one set of the recovery discs can be created per computer.
●
Number each disc before inserting it into the optical drive of the computer.
●
If necessary, you can cancel the disc creation before you have finished creating the recovery discs.
●
The next time you select Create a set of recovery discs (Recommended), you will be
prompted to continue the disc creation.
To create a set of recovery discs:
Select Start > All Programs > HP Backup & Recovery > Backup & Recovery
1.
Manager.
Click Next.
2.
Click Create a set of recovery discs (Recommended), and then click Next.
3.
Follow the on-screen instructions.
4.
ENWW
Read-write discs, such as CD-RW and DVD±RW discs, are not compatible with HP Backup
Creating recovery discs 135