Assembly Procedure For Lens (Revised Version) - Panasonic Lumix DMC-TZ35EB Service Manual

8.5. Assembly Procedure for Lens
(Revised Version)
8.5.1. Insert the Straight Frame
1. Insert the Straight Frame into the Both Side Cam Frame
as below.
(The phase difference between the two
90 degrees.)
*The mark of the Straight Frame is under the Shading
Sheet.
2. Insert the Bayonet Key of the Straight Frame into the
Bayonet Inlet of the Both Side Cam Frame.
(Pass the convexity of Bayonet Inlet through the
concavity of Bayonet Key.)
3. Turn the Straight Frame about 90 degrees in the arrow
direction so that the
close to the mark of Both Side Cam Frame.
*As the drawing below indicates, align the Grooves of
Straight Frame with the one of Both Side Cam Frame.
marks is about
8.5.2.
1. Insert the 3rd Lens Frame Unit as the drawing below
indicated.
*Align the Stepping Motor of the 3rd Lens Frame Unit with
the
Cam Pin of the 3rd Lens Frame Unit in the each Groove
of the Straight Frame Unit.
34
mark of Straight Frame comes
Insert the 3rd Lens Frame Unit and
the 2nd Lens Frame Unit
mark of the Straight Frame Unit, then put the each