Listening To Fm And Am Radio; Selecting A Surround Mode; Advanced Functions; Audio Processing And Surround Sound - Harman Kardon AVR 1565 Owner's Manual

AVR 1565/AVR 1566

Listening to FM and AM Radio

Select the AM/FM source. use the tuning up/down buttons to tune a station, which will
be shown on the front-panel display and the tV screen.
the AVr defaults to automatic tuning, meaning each press of the tuning up/down
buttons scans until a station with acceptable signal strength is found. to switch to
manual tuning, in which each press of a tuning button steps through a single frequency
increment, press the tuning Mode button. each press of the tuning Mode button toggles
between the automatic and manual tuning modes.
once you have tuned an FM station, toggling the tuning Mode setting also switches the
radio between stereo and monaural reception. (Mono reception may improve reception
of weaker stations.)
Preset Stations
A total of 30 stations (AM and FM combined) may be stored as presets. when the desired
station has been tuned in, press the Memory button on the remote, and two dashes will
flash on the front-panel Message display. use the number buttons to enter the desired
preset number.
to tune a preset station, press the preset up/down buttons or enter the preset number
using the number buttons.

Selecting a Surround Mode

Selecting a surround mode can be as simple or sophisticated as your individual system
and tastes. Feel free to experiment, and you may find a few favorites for certain sources
or program types. You can find more detailed information on surround modes in Audio
processing and Surround Sound , on this page.
to select a surround mode, press the oSd button on the remote to display the Master
menu:
** MASTER MENU
INPUT SETUP
SURROUND MODE
MANUAL SETUP
SYSTEM SETUP
use the up/down and ok buttons to select Surround Mode. the Surround Mode menu
will appear:
* MODE : MUSIC *
DOLBY PLII MUSIC
CENTER WIDTH : 3
DIMENSION
PANORAMA
BACK TO MASTER MENU
use the up/down and ok buttons to select the desired surround-mode category.
Auto Select: For a digital program, such as a movie recorded with a dolby digital or dtS
soundtrack, the AVr will automatically use the soundtrack's native surround format. For
two-channel analog and pcM programs, the AVr uses the logic 7 Movie, logic 7 Music
or logic 7 game mode, depending on the source.
Virtual Surround: when only two main speakers are present in the system, you can
use hArMAn virtual surround to create an enhanced sound field that virtualizes the
missing speakers.
Stereo: when you want two-channel playback, select the number of speakers you want
to use for playback:
• "2 ch Stereo" uses two speakers.
• "5 ch Stereo" plays the left-channel signal through the front left and surround left
speakers, the right-channel signal through the front right and surround right speakers,
and a summed mono signal through the center speaker.
20
**
: 0
: Off
Operating Your AVR, continued,
Movie: Select from the following when you want a surround mode for movie playback:
logic 7 Movie or dolby pro logic II Movie.
Music: Select from the following when you want a surround mode for music playback:
logic 7 Music or dolby pro logic II Music. the dolby pro logic II Music mode provides
some additional settings. See Audio processing and Surround Sound , on this page, for
more information.
Video Game: Select from the following when you want a surround mode for game
playback: logic 7 game or dolby pro logic II game.
After you select the surround-mode category, the Mode menu will appear:
* MODE : MUSIC *
DOLBY PLII MUSIC
CENTER WIDTH : 3
DIMENSION
PANORAMA
BACK TO MASTER MENU
use the left/right buttons to change the surround mode.
You can also select surround modes using the AVr's front-panel buttons:
1. press the Surr Mode button. the Message display will show the surround-mode
category and surround mode.
2. to change the surround mode within the surround-mode category, press the Surround
Select up/down buttons. each press will change to the next surround mode.
3. to change the surround-mode category, press the Surr Mode button. each press will
change to the next surround-mode category.

Advanced Functions

Much of the adjusting and configuration your AVr requires is handled automatically, with
little intervention required on your part. You can also customize your AVr to suit your
system and your tastes. In this section, we will describe some of the more advanced
adjustments available to you.

Audio Processing and Surround Sound

Audio signals can be encoded in a variety of formats that can affect not only the quality
of the sound but also the number of speaker channels and the surround mode. You may
also manually select a different surround mode, when available.
Analog Audio Signals
Analog audio signals usually consist of two channels – left and right. Your AVr offers two
options for analog playback:
DSP Surround Off Mode: the dSp Surround off mode digitizes the incoming signal and
applies the bass-management settings, including speaker configuration, delay times
and output levels. Select this mode when your front speakers are small, limited-range
satellites and you are using a subwoofer. to select this mode, use a digital audio input or
turn the tone control setting off, then select 2 ch Stereo mode.
Analog Surround Modes: Your AVr is able to process two-channel audio signals to
produce multichannel surround sound, even when no surround sound has been encoded
in the recording. Among the available modes are the dolby pro logic II, hArMAn virtual
speaker, logic 7 and 5 ch Stereo modes. to select one of these modes, see Selecting a
Surround Mode , on this page.
Digital Audio Signals
digital audio signals offer greater flexibility and capacity than analog signals and allow
the encoding of discrete channel information directly into the signal. the result is
improved sound quality and startling directionality, since each channel's information is
transmitted discretely. high-resolution recordings sound extraordinarily distortion-free,
especially in the high frequencies.
and Advanced Functions
: 0
: Off