Motor Disposal Requirements; Emergency Equipment; Emission Control Information; North American Models - Yamaha F30 Owner's Manual

bottom of the hull can be coated with an anti-
fouling paint to inhibit marine growth.
Anti-fouling paints specifically formulated for
use on aluminum may be applied to the out-
board motor. The original Yamaha paint sur-
face may be scuffed lightly before applying
anti-fouling paint, but do not remove the orig-
inal paint. Removal of the original paint will
increase the rate of corrosion.
ECM02410
NOTICE
Anti-fouling paint for fiberglass and wood
may contain materials, such as copper,
graphite, and tin, that can cause corro-
sion if applied to aluminum boats and
outboard motor components. Never ap-
ply these types of paint to your outboard
motor because rapid corrosion damage
could occur.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
ECM02420
NOTICE
Painted sacrificial anodes will not provide
corrosion protection.
EMU36341

Motor disposal requirements

Never illegally discard (dump) the motor.
Yamaha recommends consulting the dealer
Specifications and requirements
about discarding the motor.
EMU36352
Keep the following items onboard in case
there is trouble with the outboard motor.




Consult your Yamaha dealer for details.
EMU25222

Emission control information

EMU25230

North American models

This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31561
Approval label of emission control certif-
icate
This label is attached to the bottom cowling.
New Technology; (4-stroke) MFI
1. Approval label location

Emergency equipment

A tool kit with assorted screwdrivers, pli-
ers, wrenches (including metric sizes), and
electrical tape.
Waterproof flashlight with extra batteries.
An extra engine shut-off cord (lanyard)
with clip.
Spare parts, such as an extra set of spark
plugs.
1
ZMU06447
19