8.
Remove the subwoofer (see
9.
Remove the system board (see
Remove the memory module:
1.
Turn the system board over.
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the
memory module. (The memory module tilts up.)
CAUTION:
To prevent damage to the memory module, hold it by the edges only. Do not touch
the components on the memory module.
3.
Slide the memory module forward (2) to remove it.
Reverse this procedure to install a memory module.
Subwoofer on page
63).
System board on page
67).
Component replacement procedures
73