Installing The Steam Deflector; Installing The Dishwasher Under The Countertop - Miele G 879 SCVi Operating Instructions Manual

1. Installing the steam deflector

(if applicable)
A stainless steel coverplate is supplied
to protect the underside of the counter-
top against steam rising from the dish-
washer when the door is opened. If the
countertop is made of Corian®, gra-
nite, marble or other solid, waterproof
material, the steam deflector should not
be used.
Squeeze a bead of sealant from the
supplied tube into the angle formed
by the curved edge
plate.
Align the plate
edge of the worktop (see illustration)
and use the supplied tacks to nail it
in place.
On countertops with wood or lami-
nate edging, the tacks should be
nailed through the rear holes of the
coverplate.
b
of the cover-
c
with the lower front
2. Installing the dishwasher
under the countertop.
For ease of service and quick discon-
nection, it is preferable to install the ma-
chine so that the water and electricity
supplies can be accessed through an
adjacent cabinet, rather than situating
them behind the machine. See the
"Plumbing" and "Electrical" sections for
proper connection procedures before
continuing.
Certain steps in the installation
procedures require that the dish-
washer be pulled out of its opening.
For this reason, perform the final
plumbing and electrical connection-
s after the machine has been levelled
and the front panel has been
mounted.
Installation
51