Interrupting A Program; Changing A Program; Turning The Dishwasher Off - Miele G 879 SCVi Operating Instructions Manual

Interrupting a program.

A program can be interrupted by open-
ing the door.
If the door is once again closed, the
program will continue from the point of
interruption.
Warning!
The water in the dishwasher may
be hot, and steam may be present!
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. The danger
of burns and scalding exists.
Once opened, allow 20-30 seconds
for the internal temperature to
equalize before closing the door
again.

Changing a program.

A program can only be changed before
the door is closed. If a program has al-
ready started, turn off the dishwasher,
and re-select a program.
Operating the dishwasher

Turning the dishwasher off.

At the end of a program:
Open the door slightly. The indicator
lamp in the program touch pad will
go out.
If the program indicator lamp is still
lit, the program has not yet finished.
Close the door to allow the program
to finish.
Press the "O" (OFF) touch pad (19).
The indicator lamp will go out.
Open the door completely and un-
load the dishwasher (see "Unloading
the dishwasher").
Close the door.
If the dishwasher will not be used for
an extended period of time,
Turn off the water valve.
33