Getting Started; Unpacking - Sony SAVA-27 Operating Instructions Manual

Home theater active speaker system
Hide thumbs Also See for SAVA-27:
Table of Contents

Advertisement

Getting Started

Unpacking

Check that you received the following items with your
speaker system:
• Rear speakers SS-SR171 (2)
• Front L/R speaker connecting cord, 3.5 m (1)
• Rear speaker connecting cord, 10 m (2)
• Audio connecting cord, 1.5 m (1)
• Remote commander (remote) RM-J27 (1)
• Sony SUM-3 (NS) batteries (2)
• Speaker bases (2)
• Screws (8)
• SCART adaptor (1) (for European model only)
Inserting batteries into the remote
Insert two size AA (R6) batteries with the + and – on
the battery compartment. When using the remote,
point it at the remote sensor g on the front speaker
(left).
z
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
speakers, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of
time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Installing the speaker bases
Be sure to install the supplied speaker bases before you
use the speakers.
1
Use a screw driver to fasten the bases to the
bottom of the speakers with the supplied wood
screws.
2
Make sure the bases are securely attached and
stand the speaker uplight.
4
]
}
}
]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents