Toshiba RBC-AMS51E-ES Installation Manual page 6

Lite-Vision plus Remote Controller
◆ Remote control wiring and inter-unit wiring between remote controllers
Do not allow the wire for the remote controller (communication wire) and the wire for AC220-240 V to come into
contact or put them together in one electrical conduit; otherwise, the control system may have trouble due to noise.
* Varies depending on the type of remote controller used.
Wiring type
Total length of remote control wiring
and inter-wiring between remote
controllers
(L+L1+L2+...Ln)
Total length of inter-wiring between
remote controllers
(L1+L2+...Ln)
Remote control wiring
◆ Installation of multiple remote controllers
To install two or more adjacent remote controllers, follow the instructions in the Fig. 1 and 2.
(Fig. 1)
(Fig. 2)
1 remote controller
Up to 500 m
Indoor Indoor
unit unit
L
L1
Remote controller inter-
Remote
units wires for group
control.
controll
20 mm or more
(when adjacent remote
controllers are installed)
2
VCTF: 0.5 mm to 2.0 mm
2 remote controllers
Up to 300 m
Up to 200 m
Indoor
unit
L2
Ln
(Up to 8 units)
Wall
Wall
32.5 mm or more
(from a wall)
– 5 –
Installation Manual
2
x 2
2 remote controllers
including a wireless remote
controller
Up to 400 m
Indoor
unit
32.5 mm or more
(from a wall)