Targa LCD-Display 19" User Manual page 12

4. Press the
value.
5. Wait until the menu disappears or press button 1 (11) twice
to exit the menu immediately.
DCR means „Dynamic Contrast Ratio" and offers an
optimum contrast by adjusting the display backlight
automatically depending on the picture contents.
Auto Image Adjust
Automatically adjusts the settings for the horizontal and vertical
position, the horizontal size as well as the fine control and
sharpness.
To do this, press button 2.
Locking the On/Standby Switch
Press and hold the 1 and
bar is completed to enable or disable the On/Standby switch lock.
The lock will disable the Power On/Standby switch (15) located on
the front panel of the device.
OSD Lock
Press and hold the 1 and
bar is completed to enable or disable the OSD lock. The OSD lock
will prevent the OSD menu from being displayed.
Targa Visionary LCD 19-6 Wide
(12) or (13) buttons to select the desired
buttons simultaneously until the status
buttons simultaneously until the status
11