Targa Visionary LCD 22-1 Wide Operating Notes First of all, many thanks for choosing this high-end multiscan monitor. Before starting installation, please read this manual completely. Intended Use This TFT monitor is an IT electronic device. It may only be used for private use, not industrial or other commercial purposes.
Targa Visionary LCD 22-1 Wide Safety Information During the manufacturing and testing of this monitor, the safety of the future user was our main goal. However, inadequate operation or installation can cause damage to the device and harm to the user.
Page 5
Targa Visionary LCD 22-1 Wide Do not open the monitor’s housing. The high-voltage components inside the device may produce an electric shock even after the power cord has been disconnected. Do not use the device if the casing is damaged. If this happens, it must first be examined by authorized service personnel.
Targa Visionary LCD 22-1 Wide If you notice any smoke, unusual noise or strange smells, switch off the LCD display immediately and pull the plug out from the wall outlet. Contact customer service. It is very dangerous to continue using the LCD display under these conditions.
Targa Visionary LCD 22-1 Wide Getting started Mount the supplied socket to the base of your LCD 22-1 Wide as indicated on the bottom of the base. Please check that delivery contents are complete using the list below: 1 - Monitor...
Targa Visionary LCD 22-1 Wide Back Panel Connectors Quick Guide 1. Connecting the Video Cable Power your monitor and computer off. Use the VGA cable (2) to connect the computer to the port (9) of the monitor. 2. Connecting the Audio Cable Use the audio cable (3) to connect the computer’s Audio Out...
Targa Visionary LCD 22-1 Wide Setting the Resolution The recommended screen resolution for your LCD 22-1 Wide is 1680 x 1050 (max. refresh rate 60 Hz). In the following we will explain resolution setting operating systems ® Windows XP and Windows Vista™.
Targa Visionary LCD 22-1 Wide Setting the Menu Language You can display the OSD (On Screen Display) menu in your local language. Proceed as follows: 1. Press button 1 (11) on the monitor. 2. Press the button (12) to select the menu option “Setup Menu”.
Targa Visionary LCD 22-1 Wide Button Function Overview You can use the control buttons to access the most common settings directly. Setting Brightness and Contrast 1. Press the (12) or (13) buttons. The brightness and contrast menu will appear. 2. Press the...
Page 13
Targa Visionary LCD 22-1 Wide Locking the On/Standby Button Press and hold the 1 and buttons simultaneously until the status bar is completed to enable or disable the On/Standby button lock. The lock will disable the Power On/Standby button (15) located on the front panel of the device.
Targa Visionary LCD 22-1 Wide OSD Menu Via the OSD menu you can access multiple settings to customize the LCD 22-1 Wide according to your and your computer’s requirements. Use the buttons 11 to 14 (as described on page 9) to navigate the menu.
Page 15
Targa Visionary LCD 22-1 Wide Press the buttons to choose an option and press button 2 to confirm. Then press the buttons to select the desired value. The Brightness option will be disabled while DCR is on. DCR means „Dynamic Contrast Ratio“ and offers an optimum contrast by adjusting the display backlight automatically depending on the picture contents.
Page 16
Targa Visionary LCD 22-1 Wide Information Shows information about the input signal coming from your computer’s graphics card as well as the model and serial number of your monitor. Manual Image Adjust: To manually adjust the picture position. Horizontal Size sets the horizontal picture size.
Page 17
Targa Visionary LCD 22-1 Wide OSD Time Out: After the set time, the OSD menu will disappear if you don’t perform any further settings. You can select values between 5, 15, 30 and 60 seconds. OSD Background Off: Press button 2 to enable or disable the coloured background for the OSD display.
Targa Visionary LCD 22-1 Wide Advanced Supported resolutions 640 x 480 @ 60Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz 640 x 480 @ 67Hz 720 x 400 @ 70Hz VESA 800 x 600 @ 56Hz...
Targa Visionary LCD 22-1 Wide Wall-Mounting You can mount your LCD 22-1 Wide to the wall by using a VESA wall mount (not included in the package) with a 100 x 100 mm receptacle. To do so, disassemble the base as follows: 1.
Targa Visionary LCD 22-1 Wide Technical Specifications LCD Display 22” Wide TFT (16:10) Power Management Complies with Energy Star, VESA DPMS-compatible = 1 W Power on consumption: max. 55 W Supported Resolution max. 1680 x 1050 Refresh rate max. 75 Hz Pixel size 0.285 x 0.285 mm...
Targa Visionary LCD 22-1 Wide Troubleshooting No power Make sure that the power cord is properly connected to the wall outlet and that the cables to the monitor are fixed properly into their respective ports. Connect a different electrical appliance to the wall outlet to verify that it is working properly.
Page 22
Targa Visionary LCD 22-1 Wide Type 2: Non-lighting pixel (a dark or black dot) even when it should light. Type 3: Abnormal or defective sub-pixels of the basic colours (e.g. steady lighting with half intensity, non-lighting of a specific colour, blinking or flickering, but not included in Type 1 or Type 2).
LCD Monitor model: Targa Visionary LCD 22-1 Wide is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC) and the Council Directive relating to Low Voltage 2006/95/EC.