Targa Visionary LCD 19-6 Wide
Setting the Menu Language
You can display the OSD (On Screen Display) menu in your local
language. Proceed as follows:
1. Press button 1 (11) on the monitor.
2. Press the
Menu".
3. Press button 2 (14).
The "Setup Menu" opens and the item "Language Select"
should be highlighted otherwise press the
buttons to select it.
4. Press button 2 (14).
5. Press the
to scroll upwards to select the desired display language.
6. Press button 2 (14) to confirm your selection.
7. Wait until the menu disappears or press button 1 (11) twice
to exit the menu immediately.
Button Function Overview
You can use the control buttons to access the most common
settings directly.
Setting Brightness and Contrast
1. Press the
contrast menu will appear.
2. Press the
(Brightness will be disabled while DCR is on).
3. Press button 2 (14) to enable the selected menu item.
10
button (12) to select the menu option "Setup
button (12) to scroll downwards or press
(12) or
(13) buttons. The brightness and
(12) or
(13) buttons to select a menu option
(12) or
(13)
(13)