Size Switching - Hitachi 26LD9000TA User Manual

FUNCTION (continued)

Size Switching

Each time button of the remote control is pressed, the screen
display size is switched in sequence, and the status will be displayed
at the bottom of the screen.
TV/AV signal input
TV/AV1/AV2/AV3/AV4 /HDMI
4:3 Panoramic
FULL Cinema
You can display the image at optimum condition by selecting display size depending on the current output image as
shown below.
Current Output
Image Display Size
(Input Signal)
(4:3 Signal)
(Cinema)
(Squeeze)
Information
Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.
CAUTION
Using a wide-screen television
This television has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different form the original. Take this into consideration
when making screen mode choices.
Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder's right protected by Copyright Law.
When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
reflecting original intention.
32
4:3 Play a 4:3 image on screen faithfully. Blanking occurs on both sides.
Play a 4:3 image which enlarges horizontal and vertical size of the
Panoramic
middle in equal scales, and displays both sides appearing much wider.
Play a 21:9 image in 4:3 image (Cinema size) expanding vertically.
Cinema
*In some case, slight blanking may remain at the top and bottom.
Play a 4:3 image faithfully in the standard vertical size and horizontally
Full
squeezed.
Picture Size
To display suitable screen as follows.
9
3
16
16(or 21)
9
4