Table of Contents
Advertisement
Problem solving guide
Problem
The "End", "Start" and
"Top Solo" indicators
flash simultaneously.
Knocking noise from
within the dishwasher.
Rattling from within the
dishwasher.
A whistling noise is
heard during the pro-
gram
Knocking noise in the
water pipes
42
Possible cause
A service call may be
needed.
The spray arm is hitting
an item in the basket.
The dishes are moving
around inside the dish-
washer.
The circulation pump seal
sometimes makes a whis-
tling noise. This may be
caused by the detergent.
This may be caused by
the installation or the or
the piping.
Remedy
– Turn the program se-
lector to "Stop".
– Turn off the dishwasher
using the "On/Off" but-
ton.
After 5 seconds:
– Turn the dishwasher
back on.
– Turn the program se-
lector to the desired
program.
– Press the "Start" but-
ton.
If the indicator lights flash
again:
– Call the Miele Techni-
cal Service Dept.
Interrupt the program and
rearrange items obstruct-
ing the spray arms.
Interrupt the program and
secure the items inside.
This is not a problem. Try
other detergents. Consult
the Miele Technical Ser-
vice Department if the
noise is persistent.
This has no affect on
dishwasher. If in doubt
contact a plumber.
Hide quick links:
Advertisement
Table of Contents
