Interrupting A Program; Changing A Program - Miele G 811 Operating Instructions Manual

Dishwasher
Hide thumbs Also See for G 811:
Table of Contents

Advertisement

Operating the dishwasher

Interrupting a program

A program is interrupted as soon as the
door is opened.
If the door is closed again, the program
will continue from the point it was at be-
fore the door was opened.
Warning:
Water in the dishwasher may be
hot. There is a danger of being
burned!
Only open the door if absolutely
necessary and with caution. Be-
fore closing the door, leave it
open for approximately 20 sec-
onds. This will allow the tempera-
ture in the wash cabinet to settle.
Close the door firmly until it clicks
into place.
32

Changing a program

If a program has already started and
you wish to change it proceed as fol-
lows:
^ Turn the program selector (17) to the
"Stop" position.
^ Leave the program selector (17) in
this position for at least one second.
^ Then turn the program selector (17)
to the program you wish to use.
^ Press the "Start" button (18).
The program starts.

Advertisement

Table of Contents
loading

Table of Contents