Installing The System Board - Dell Inspiron 1150 Service Manual

System Board: Dell Inspiron 1150 Service Manual
20. Lift the front of the system board out and away from the base plastics.

Installing the System Board

1. Insert the video connector on the replacement system board through the back of the base
plastics.
2. Replace the two hex nuts that secure the video connector to the base plastics.
3. Replace the two M2.5 x 6-mm screws that secure the left antenna, which is located between the
hard drive and optical drive cages, to the system board.
4. Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.
5. Replace the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.
6. Replace the two M2.5 x 5-mm screws that secure the chipset heat sink to the system board.
7. Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield
to the system board.
8. Replace the speakers.
9. Replace the microprocessor.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LAP...ecked%20ok/Inspiron/1150/1150%20SM/sysboard.htm (5 of 6)6/21/2004 12:41:11 AM