Track layout
Attaching the lockon to the track
T
he lockon connects power from
your controller to the track.
Attaching the lockon to the track
is quick and easy. First, place
the lockon under any
straight section of track.
Fit the center lip of
the lockon onto the
edge of an outside rail.
Once the lockon is securely
attached to the track, it's time to
insert the wires from the controller
Suggested track layouts
Here are some examples of layouts you can build with 8 straight and 8 curved sections of
track. Remember—the more track you own, the more variations you can create in your
train layout. And that means more action and more fun!
4
4
Press the lockon upward so that the
spring contact snaps onto the
center rail. The lockon
should face outward
when setting up your
track and make sure it is
firmly connected. Use the illus-
trations below as a step-by-step
guide.
2
Snap spring contact
to the middle rail
into the two spring clips on the lock-
on. See page 5 for easy-to-follow
steps.
1
Hook lip to the
outside of the rail