Table of Contents
Advertisement
GA-6KIEH-RH/GA-6KIEL-RH Motherboard
13 ) BAT1 (Battery)
If you want to erase CMOS...
1.Turn OFF the computer and unplug the power cord.
2.Remove the battery, wait for 30 second.
3.Re-install the battery.
4.Plug the power cord and turn ON the computer.
14/15 ) CPU_FAN1/SYS_FAN1 (CPU fan/System fan cable connectors)
The cooler fan power connector supplies a +12V power voltage via a 3-pin/4-pin(CPU_FAN) power
connector and possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is the
ground wire (GND).
Remember to connect the CPU/system fan cable to the CPU_FAN/SYS_FAN connector to prevent
CPU damage or system hanging caused by overheating.
SYS_FAN1
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
1
CPU_FAN1
2 4
CAUTION
Pin No.
Definition
1
GND
2
12V
3
Sense
4
Control
1
Pin No.
Definition
1
GND
2
12V
3
Sense
4
Control
Advertisement
Table of Contents
