Superior WRE6036RS Installation And Operation Instructions Manual page 15

FIREBRICK WALL INSTALLATION
INSTALLING SCREEN
1. Slide round end of screen rod into rings at
top of screen. Attach one push-on nut to end
of rod before attaching last ring of screen.
2. Insert the round end screen rod into hole
on the left and right side of smoke shelf
(Figure 25).
3. Mount flat end of screen rod with #10 x 5/8"
to center of smoke shelf.
4. Install other screen rod in same manner.
Rating
Plate
Figure 25 - Installing Fireplace Screen
127008-01A
Hole for Screen
Rod
Leading
Bricks
www.SuperiorFireplaces.US.com
Continued
INSTALLING GRATE RETAINERS
1. Place the provided grate retainers on the
hearth as shown in Figure 26. The back
of the retainer will be flush with the rear
firebrick wall. Mark the center of the hole
on the hearth with a marker.
2. Drill two holes in the hearth in the marked
locations using a masonry 3/16" drill bit.
3. Secure grate retainer with masonry screws
provided.
WARNING: Risk of fire! Re-
place grate with FMI PRODUCTS,
LLC grate only (see Parts, page
20). This grate has been de-
signed to keep the operation of
your fireplace safe and efficient.
Figure 26 - Installing Grate Retainers
15