Setting Up - La Crosse Technology WS-2306 Operation Manual

5.

Setting up

It is always best to set up on a table inside before mounting your
sensors. This way you can perform a function test (section 8).
First, choose to use the 240V adaptor (included in this set) or
batteries for operation. Both these methods allow for operation using
wireless 433MHz transmission or cable connection between the base
station and the sensors and setting up for both methods is as follows:
Base Station:
Sockets
and PC
COM port
PC COM
Port
Socket for
Thermo-Hygro
Sensor
Socket for
Adaptor
Battery
compartment
7