Scan A Barcode - Panasonic JT-H300HT-E1 Operating Instructions Manual

Scan a Barcode

How to use the laser scanner
■
1 Press the side or center trigger. A laser will be
radiated.
Note:
• Depending on operations to be performed,
another key may be used to scan a code
instead of the trigger.
Move the unit so that the barcode is located on
2
the center of scan area.
Note:
• Locate the unit so that the Laser goes
across the barcode.
3 After scan, the buzzer beeps and the indicator
lights red or green.
(The sound of the buzzer and colors of the
indicator depend on applications to be
performed)
Note:
• When the barcode scanner is located horizontally to the barcode, scan may not be
performed properly because of reflection. In this case, tilt the unit slightly.
24
Trigger