Lcd Installation - ICP Electronics DM-121 User Manual

2.2 LCD Installation

DM-121/SRM-121 provides two features for your choosing: one is LCD only; the
other is LCD with touch screen. You can use VGA cable connects from LCD panel
to your system VGA interface.
2.2.1 LCD without Touch Screen
There are five LCD adjustment switches on the rear panel of DM-121/SRM-121.
Also, there are two ports for VGA and RS-232.
without Touch Screen, just connect the VGA Card to the VGA Signal Input port.
The power connection you can choose 12V DC jack or terminal block use to 12V
DC input.
OSD VGA
BOTTON INPUT
VGA SIGNAL
MENU DN UP Exit INPUT
VIEW THE SIDE
(under diagram)
POWER INPUT
DC
RS-232
12V DC
Gnd 12V Gnd
(OPTION)
RS-232
(OPTION)
9
If you want to install LCD
POWER INPUT:
CAUTION:
Yellow color: to +12VDC
Black color: to Gnd
FOR INDOOR USE ONLY