Removing the Mainboard
1. Perform the
page 3-19.
2. Perform the
3. Perform the
4. Perform the
5. Turn the computer over to access the base side of the lower case assembly.
6. Disconnect the speaker cable from the mainboard.
7. Turn the computer over to access the mainboard.
8. Release the LCD cable from the adhesive tape securing it.
Machine Maintenance
Downloaded from
www.Manualslib.com
"Removing the Palmrest Module/Upper
"Removing the ODD
"Removing the SATA
"Removing the WLAN
Figure 3-40. Speaker Cable
Figure 3-41. LCD Cable Adhesive Tape
manuals search engine
Case" procedure described on
Module" procedure described on page 3-15.
Board" procedure described on page 3-27.
Module" procedure described on page 3-29.
0
3-31