Table of Contents
Advertisement
3. Connect the touchpad cable to the mainboard (1), then press the connector latch (2) until
it locks into place.
4. Turn the computer over to access the base side of the lower case assembly.
5. Secure the upper case to the lower case assembly using sixteen screws.
Table 3-148. Screws
Upper Case Reassembly
Machine Maintenance
Downloaded from
www.Manualslib.com
Figure 3-147. Touchpad Cable
Figure 3-148. Upper Case Screws – Base Side
Step
manuals search engine
Screw
M2.5 × 6
Quantity
Screw Type
16
3-91
Advertisement
Chapters
Table of Contents
