Material Supplied; Installation Dimensions - Whirlpool Cooker hoods User And Maintenance Manual

MATERIAL SUPPLIED

Remove all the components from the packets. Check that all the components are included.
• Hood assembled with motor, lamps and grease filters fitted (1 or 2 grease filters, depending on the model).
• Instructions for assembly and use
• 1 Assembly template
• 1 - adapter Torx T10
• 1 - adapter Torx T20
• 1 deflector
• 3 wall plugs Ø 8mm
• 3 screws Ø 5x45
• 3 screws Ø 3.5x9.5
• 1 washer Ø 5.3x2
• 1 cable clamp
• Power cable
• 2 carbon filters
INSTALLATION - PRELIMINARY ASSEMBLY INSTRUCTIONS
The hood is designed for installation in "Filter version".
Filter Version
Air is filtered through the carbon filter/s and recycled into the surrounding environment.
IMPORTANT: Check that air recirculation is ensured.
If the hood does not have the carbon filter/s, order one/them and fit before use.
Install the hood away from very dirty areas, windows, doors and heat sources.
The hood comes with all the materials necessary for installation on the majority walls/ceilings. However, a qualified technician must ensure that the materials
are suitable according to the type of wall/ceiling.

INSTALLATION DIMENSIONS

630 mm min (55cm wide model)
Adjacent wall units
880 mm min (80cm wide model)
65 cm (gas or combi cookers)
50 cm (electric cookers)
Adjacent wall units
centre line
hob surface
GB5