Thank You - Jabra SP 500 User Manual

Thank you

Thank you for purchasing a Jabra SP500 the most versatile Bluetooth speakerphone on
the market. Jabra has become the market leader in hands-free communication products
through the innovation and performance of our products. The Jabra SP500 is designed to
perform superbly in any location – in the car, the home or the office.
!
Drive safely
Several studies have shown that cell phone usage while driving creates a distraction to
the driver which may increase the likelihood of an accident. This distraction potential
is not eliminated by the use of a hands-free phone. Hands-free phones have not been
shown to be safer than hand-held phones with respect to driver distraction. When using
the phone while driving, keep conversations short and resist any temptation to make
notes or read documents. Before answering calls consider your circumstances. Pull off
the road and park before making or answering calls when driving conditions require
(e.g. bad weather, high traffic density, presence of children in the car, difficult junctions
or manoeuvres.)
Remember, driving comes first, not the call!
Abide by local laws.
Please check if the local laws where you live restrict the use of mobile phones while
driving. It is the owner's responsibility to use this product in compliance with the laws of
the place where you live.
Jabra SP500 Overview
1 Multi-function Button
2 Indicator Light (Blue/Yellow/Red)
3 Volume Control
4 Mute Button
5 Microphone Boom
6 Pairing button
7 Charging Socket
8 Speaker
2
BEFORE USING YOUR SPEAKERPHONE
1
Check for phone compatibility
The Jabra SP500 is compatible with most Bluetooth¹ (see Glossary) mobile phones. You can
check whether your phone has Bluetooth capability by visiting your phone manufacturer' s
web site or Jabra' s web site (http://www.Jabra.com/JabraCMS/NA/EN/MainMenu/Products/
ProductFinder.htm) which has complete information on compatibility.
2
Charge the batteries
The Jabra SP500 comes complete with two 1.2-volt (AA 2000 mAh) rechargeable
batteries that must be fully charged before you use the speakerphone for the first time.
1. Important: Remove the battery protection plastic sheet to activate the batteries.
(See fig. 1. fig. 1. fig. 1. fig. 1. 1 ) ) ) )
2. Plug the adaptor jack into the speakerphone and the AC adaptor or the vehicle
power charger into a power socket. (See fig. 1. (See fig. 1. (See fig. 1. (See fig. 1.
3. 3. The red light will turn on when charging begins. After approximately 2 3. The red light will turn on when charging begins. After approximately 2
light will go out indicating that the Jabra SP500 is fully charged.
4. Unplug the AC adaptor or the vehicle power charger lead from the speakerphone.
5. You are now ready to "pair" the Jabra SP500 with your mobile phone. (See Section 4)
WARNING: Using another AC adaptor other than the one provided may damage or
destroy the speakerphone. We recommend that you use the rechargeable batteries
supplied but you can use other brands. You can not use non rechargeable batteries
in your Jabra SP500.
3
Switching on the Jabra SP500
Switch on the Jabra SP500
1. Press and hold the multifunction button
the blue LED flashes three times. When the Speakerphone is in standby mode, the
Blue LED flashes every three seconds.
Please note that the Blue light will be automatically switched off after 1 min in order to
save power and to not distract when driving at night. The light will be re-activated upon
any key press.
Switch off the Jabra SP500
1. Press and hold the multifunction button for approximately 5 seconds until you hear
the shut down melody and the LED has been switched off completely.
Glossary Glossary) mobile phones. You can
1 ) ) ) )
hours the red
until you hear the start up melody and
3