Cleaning Your Heater; Proof Of Purchase - Celsius CELCV200 Operating Instructions

TIMER
TIMER
Set the MODE switch to the Timer position (this function can only be used once a heat level has been
selected (Heat Control).
You must set the time prior to programming the Timer. To do this; turn the outer dial of the timer in a
clockwise direction until the time of the day (24-hour clock) corresponds with the triangular marking.
Example if it is 2pm (1400 hours) then set the triangular mark in line with 14. One complete turn of the dial
corresponds to 24 hours.
There are 96 "riders", positioned around the dial, each rider represents 15 minutes.
Where all the "riders" are pushed to the outside of the timer the heater will be ON continuously.
To set a specific time for example:
If you want the heater to be on from 6pm to 10pm, then set all the riders from 18 to 22 (1800 hours to 2200
hours) to the outside of the rim and all other riders to the inside of the timer. The unit will then turn on
automatically at 6pm and off again at 10pm.
WARNING! Take care in positioning your heater, using the timer will mean the heater will come on
automatically. Fire may result if placed next to combustible material.

CLEANING YOUR HEATER

The heater requires regular cleaning to ensure trouble free operation:
Unplug the heater from the mains supply before cleaning.
Ensure that the heater has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and dirt.
Use a vacuum cleaner to remove dust and fluff from around the grills.
Never use solutions such as benzene, thinners or polishing agents.
Ensure the heater is dry before plugging back into the mains supply.
CAUTION: This heater generates heat during use. Proper precautions must be taken to prevent the risk of
burns, scalds, fires or other damage to persons
WARNING: Keep all objects at least 1 metre from the front, sides and rear of the appliance.
WARNING: Do not use this heater with a programmer, remote-control system, separate timer or any other
device that switches the heater on automatically.

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase.
Mode Switch
Indicates actual time
"ON" button
"TIMER" button
"OFF" button
TECHNICAL SPECIFICATIONS
Supply: 220-240VAC 50Hz
Model No: CELCV200
Wattage: 2000W