Celsius CELCH130 Operating Instructions Manual

Quick Start Guide
1. Place heater on a flat surface ensuring there is at
least 1 metre clearance all around and over the
top of the heater. Do Not place items on or
against the heater. Do Not place heater on carpet.
IMPORTANT: NEVER COVER THIS HEATER
3. Rotate the Heat Selector knob to position.
HEAT SELECTOR
"0" = OFF
= Fan Only
"I" = Low Heat
"II" = High Heat
5. With the Heat Selector knob set to either "I" or "II",
when the desired room temperature is reached, slowly
turn the knob anti-clockwise until the heater turns off
(you will hear a click).
Note: As the
thermostat
maintains room
temperature it
will switch on and
off. As it switches
on and off, you
may notice a blue flash from inside the heater. This is NOT
dangerous and is no cause for alarm.
If you have any queries, please feel free to call our customer service team on
1300 465 324 or email info@cdbgoldair.com.au
THIS IS IMPORTANT FOR YOUR SAFETY
PLEASE TAKE A MINUTE TO READ IT CAREFULLY BEFORE SWITCHING ON YOUR
HEATER
This is a Quick Start Guide Only. It is important that you read the instructions fully for Safety, Correct
Installation and Correct Operation of your product. Failure to do so may result in Damage or personal Injury.
1m
2. Insert plug into power socket and turn on.
Note: Do not use power boards or double adaptors,
etc. as it may overload your power socket and trip your
power.
4. Turn the Thermostat knob clockwise until it
reaches the maximum temperature on the
graduated scale.
6. Do not operate while unattended.
Turn the selector switch to "O" (Off) and then Turn
power off and Unplug.
Always Unplug when not in use.